Bedienungsanleitung Kress 1 2 fix (Seite 13 von 48) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

381308

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

English 13

Do not overreach. Keep

proper footing and balance at

all times.

This enables better control of the

power tool in unexpected situations.

Dress properly. Do not wear loose clothing

or jewellery. Keep your hair, clothing and

gloves away from moving parts.

Loose clothes, jewellery or long hair can be caught

in moving parts.

If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used.

Use of these devices can reduce dust related hazards.

Secure the working part! Use holding

fixtures or a vice to hold the working part

steady. This is safer than holding it in your

hand and also leaves you both arms free to

operate the machine.

Power tool use and care

Do not force the power tool. Use the correct power

tool for your application.

The correct power tool will do the job better and safer

at the rate for which it was designed.

Do not use the power tool if the switch does not turn

on and off.

Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

Disconnect the plug from the power source

before making any adjustments, changing

accessories, or storing power tools.

Such preventive safety measures reduce

the risk of starting the power tool

accidentally.

Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate

the power tool.

Power tools are dangerous in the

hands of untrained users.

Maintain power tools.

Check for misalignment or

binding of moving parts, breakage

of parts and any other condition that

may affect the power tools operation.

If damaged, have the power tool repaired

before use.

Many accidents are caused by poorly

maintained power tools.

Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc., in

accordance with these instructions and in the manner

intended for the particular type of power tool, taking

into account the working conditions and the work to be

performed.

Use of the power tool for operations different from

those intended could result in a hazardous situation.

Check plug and power cable regularly and

have them repaired at an authorized service

depot if damaged. Extension cables must

also be checked at regular intervals and

replaced if damaged.

Any tools not in use must be locked away

safely somewhere drey out of the reach of

children.

When drilling or screwing in walls, make

sure there is no danger of hitting hidden

power, water or gas supply lines.

Battery tool use and care

Ensure the switch is in the off position before

inserting battery pack.

Inserting the battery pack into power tools

that have the switch on invites accidents.

Recharge only with the charger specified

by the manufacturer.

A charger that is suitable for one type

of battery pack may create a risk

of fire when used with

another battery pack.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kress 1 2 fix Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info