Bedienungsanleitung Kress 1000 BMH (Seite 8 von 16) (Deutsch, Englisch, Französisch)

508067

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

BMH 1000 English 9

The tool holder 1 clamps drilling and chiselling tools

without a tool key.

INSERTING TOOLS

Before any work on the machine itself, pull the

mains plug!

Clean and lightly grease the tool shaft.

Pull back the unlocking collar 3. Insert the tool while

turning into the tool holder until it latches. Release the

unlocking collar. Check whether the tool is firmly

seated.

Take care that the dust protection cap 2 is not dam-

aged.

Replace damaged dust protection caps!

REMOVING TOOLS

Slide the unlocking collar 3 to the rear and pull out the

tool.

ADJUSTING THE CHISEL

Set the gear selector/rotation stop switch 4 to an inter-

mediate position. The chisel can now be turned by

hand to the required working position.

Return the gear selector/rotation stop switch 4 to the

initial position . The chisel latches automatically as

soon as it is radially loaded by the working or chisel-

ling process.

For drilling work in metal, wood and plastic with drills

that have normal shafts, a drill chuck (13 mm max.

chuck opening) is available. The drill chuck is

mounted on the adapter (accessory) for screwdriver

bits. All common drill chucks with 1/2" x 20 UNF inter-

nal threads (13 mm max. chuck opening) can be

used.

MOUNTING THE CHUCK

Before any work on the machine itself, pull the

mains plug!

Clean the threads of the drill chuck (accessory) and

the adapter 14 (accessory).

Screw the drill chuck onto the adapter and lock the

adapter in the same manner as a drill in the tool

holder. To tighten the drill chuck, set the gear selector/

rotation stop switch 4 temporarily to position .

Do not drill into hidden electrical

lines or gas and water pipes.

Check the area to be worked with a

metal detector, for example, before

starting.

For metal, use only flawless, sharpened drills; for

stone and concrete, only masonry drills with hard

metal inserts.

Always adapt the speed to the material to be worked

and the diameter of the drill. For precision working

with metal and wood, place the machine in a drill stand

(accessory).

IMPACT DRILLING - CHISELING

Wear protective glasses and

hearing protection.

Do not apply to much pressure. The performance is

not increased in this manner.

The most effective method for chiselling is to break out

only small pieces of material.

When chiselling, work only with protective glasses

and the auxiliary handle 12. Check before starting

to work if the gear selector/rotation stop switch 4 is

engaged in the position.

DRILLING IN TILES

Start drilling slowly on the tile. After the tile is drilled

through, switch to impact drilling.

SCREWDRIVING

Screwdriver bits can be inserted into the adapter 14

(accessory). Commercially available bits with a hex-

agonal dimension of 6.3 mm or 1/4" (DIN 3126,

Form C) can be used.

The screwdriver bits are held in the adapter with a

spring ring. Therefore, use only bits with a notch.

Before any work on the machine itself, pull the

mains plug!

Always keep the ventilation slots clean.

Wipe off the accessible plastic parts regularly with a

cloth without cleaning agent.

After heavy use over a long period, the machine

should be taken to a Kress service location for an

inspection and thorough cleaning.

7 Inserting/Removing Tools

8 Drill Chuck (Accessory)

9 Practical Tips

10 Maintenance Measures

11 Environmental Protection

BMH 1000 - Buch Seite 9 Donnerstag 29. Mai 2006

Recycle raw materials instead of dis--

The machine, accessories and packa-

ging should be sorted for environ-

mental friendly recycling.

Subject to change without notice

recycling.

recycled paper

These instructions are printed on

The plastic components are labelled for categorised

manufactured without chlorine.

together with household waste

material!

Do not dispose of electric tools

posing as waste.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kress 1000 BMH Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info