Bedienungsanleitung Kress 1200 SPE (Seite 16 von 102) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

507911

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

16 English Safety rules

SaebelS-EN / 0812

Pay attention that the base plate rests securely on

the material while sawing.

A jammed saw blade can break or lead to kick-

back.

When the cut is completed, switch off the machine

and then pull the saw blade out of the cut only af-

ter it has come to a standstill.

In this manner you can avoid kickback and can

place down the machine securely.

Use only sharp, flawless saw blades.

Bent or unsharp saw blades can break or cause

kickback.

Do not brake the saw blade to a stop by applying

side pressure after switching off.

The saw blade can be damaged, break or cause

kickback.

Contact with electric lines can lead to fire and

electric shock. Damaging a gas line can lead to

explosion. Penetrating a water line causes proper-

ty damage or may cause an electric shock.

Hold the power tool only by the insulated gripping

surfaces when performing an operation where the

cutting tool may contact hidden wiring or its own

cord.

Contact with a “live” wire will also make exposed

metal parts of the power tool “live” and shock the

operator.

Take protective measures if there is danger of for-

mation of combustible or explosive dust during op-

eration that can be hazardous to health.

Example: Some dusts can be carcinogenic. Wear

a dust mask and work with a dust/chip extraction

unit, if possible to connect.

Always wait until the machine has come to a com-

plete stop before placing it down.

The tool insert can jam and lead to loss of control

over the power tool.

Keep your workplace clean.

Blends of materials are particularly dangerous.

Dust from light alloys can burn or explode.

Clamp material well. Do not support the workpiece

with your hand or foot. Do not touch objects or the

floor with the the saw running.

Danger of kickback.

Never use the machine with a damaged cable. Do

not touch the damaged cable and pull the mains

plug when the cable is damaged while working.

Damaged cables increase the risk of an electric

shock.

Residual risk. Although this information sheet

and the operating manuals for our electrical tools

contain extensive instructions on safe working

with electrical tools, every electrical tool involves

certain residual risks that cannot be completely

prevented through safety mechanisms. Therefore,

electrical tools must always be operated with the

necessary caution.

Use suitable detectors to determine if

utility lines are hidden in the work

area or call the local utility company

for assistance.

Secure the workpiece.

A workpiece clamped with clamping

devices or in a vice is held more

secure than by hand.

Do not work on materials containing

asbestos.

Asbestos is considered carcinogenic!

Tools not in use must be locked away

safely in a dry place out of the reach

of children.

37995_BA_Saebelsaege.book Seite 16 Montag, 15. Dezember 2008 8:37 08

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kress 1200 SPE Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info