Bedienungsanleitung Kress 1400 RS EA (Seite 9 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

508071

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Operation English 9

RSEA-EN / 1002

For wet and dry suction cleaning. Not suitable for

vacuuming health hazardous dusts. The suc-

tion cleaner with socket and ON/OFF automatic

switching system is intended for the connection of

electric tools.

The device is suppressed against radio and TV

broadcasts, in accordance with EN 55014-1 and is

immune to disturbances in accordance with EN

55014-2.

4. Operation

Before putting into operation, check that the mains

voltage and frequency on the identification plate

match the details of your mains supply.

When unpacking, check that the appliance is com-

plete and that there is no transport damage.

Container

Open the lock-in closures 12 of the 32-l container,

and lift off the top section 1. Tip over the container

and press in the steering rollers with pivot 15 until

they lock into place. Screw the large wheels 13

onto the axles 14.

Insert suction tube 17 (when contained in scope of

supply) into the container guide from above and

push down until it engages.

Top section

Place the top section 1 right-way-round on the

container. Observe the anti-rotation protection.

The paper filter bag 16 must not be damaged, and

the lock-in closure 12 must engage securely.

Filters

Push the folded filter cartridge 8 in a straight man-

ner over the case 5, right up to the stop point, and

lock the bayonet mount 9. The folded filter is suit-

able for wet and dry suction cleaning.

Take hold of the paper filter bag 16 at the flange

and push vertically from above into the guide of

the cyclone suction opening 11 until the stop point

is reached. The bag must rest against the contain-

er wall.

The bag increases the dust retaining capacity and

is intended for hygienic disposal. Paper filter bags

can only be used for dry suction cleaning.

Socket with ON/OFF automatic switch-

ing system

The socket III is intended for the connection of

electrical tools. In the “0“ switch setting, the socket

can be used as an extension line (e.g. for a light).

Connected load: Suction unit and appliance max.

16 A.

Filter cleaning

Appliances fitted with an electromagnetic cleaning

device can remove the dust adhering to the folded

filter 8 by vibration. This ensures optimal use of

the folded filter and extends the operating cycles.

Specified conditions of use

Technical data

Mains voltage in V / Frequency in Hz

Nominal power rating P in Watts

Noise levels

= A-rated noise level

= A-rated noise output level

K = Measurement uncertainty value

Weight in kg

Before carrying out any work on the

machine, pull the main plug.

Putting into operation

Observe correct main voltage!

-WARNING-

An electric tool must be switched off when it is

connected. The socket is always live when the

plug is inserted in a mains socket, irrespective of

the switch position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kress 1400 RS EA Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info