Bedienungsanleitung Kress KG756E (Seite 14 von 20) (Englisch)

819060

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Cordless Lawn Mower KG756E KG756E.X

Insert the safety key before installing the battery pack.

NOTE: Depress the battery release button to release

battery pack from your tool. After recharging, insert

the battery pack into tool’s battery port until you hear

a “click”. A simple push and slight pressure will be

sufcient.

OPERATION

Starting and Stopping (See Fig. G1, G2)

Press the Safety lock-out button, then the push

Operating bail to start. Release the operating bail to

stop.

NOTE: For starting, press both the Safety lock-out

button and the Operating bail at the same time.

MULCHING MOWING TIPS

While mulching, your new mower is designed to cut

the grass clippings into small pieces and distribute

them back into the lawn. Under normal conditions,

the mulched grass will biodegrade quickly and

deliver nutrients to the lawn. Please review the

following recommendations for optimum mulching

performance.

1) Avoid mowing when the grass is wet from rain or

dew. Wet grass may form clumps which interfere

with the mulching action and reduce the runtime.

The best time to mow the grass is in the late

afternoon when the grass is dry and the newly cut

area will not be exposed to direct sunlight.

2) For the best mulching performance, set the

cutting height to remove about one third of the

grass blade length, ideally no more than 40mm

at one time. If the lawn is overgrown, it may

be necessary to increase the cutting height to

reduce the pushing effort and prevent overloading

the motor. For extremely heavy mulching, it is

advisable to rst cut at a high cut height setting,

and then re-cut to the nal cut height. Otherwise,

make narrower cuts and mow slowly.

3) For the best performance, keep the mower

housing free of built-up grass. From time to time

turn off mower and wait for the blades to come

to a complete stop. Then unplug the safety key,

remove the batteries and turn mower on its side.

Using an object such as a stick, wipe out any

accumulation of grass around the blade area. Be

careful of the sharp edges of the blade. Ensure

to clean the blade area often when cutting wet

or new grass and every time after the machine is

used.

4) Certain types of grass or grass conditions may

require that an area be mulched a second time

to fully disperse the grass throughout the lawn.

If cutting a second time, it is advisable to cut

perpendicular (across) the rst cut pattern. DO

NOT CHANGE CUT PATTERN IN ANY WAY THAT

WOULD CAUSE MOWING DOWN A HILL.

5) Change your cutting pattern from week to week.

This will help prevent matting and graining of the

lawn.

6) Do not mow on a slope that has an angle of

greater than 15

CUTTING AREA

The cutting area can be affected by several factors,

such as cutting height, lawn humidity, grass length

and density. Besides, starting and stopping the

mower too many times during operation will reduce

the cutting area.

It is ideal for mowing up to 1200m² lot sizes.

TIPS:

1) It is recommended to mow your lawn more

frequently, walk at normal pace, and not to start/

stop the mower too often during operation.

2) For best performance, please ensure use two

fully charged battery packs at the same time and

always cut off 1/3 or less of the grass height.

3) Walk slowly when cutting long grass, so as to

have more effective cutting and properly discharge

the clippings.

4) Avoid cutting wet grass, otherwise it will stick

to the underside of the deck and the clippings

cannot be collected or discharged properly.

5) A higher cutting height shall be applied to new or

thick grass and it will extend the battery duration.

Adjusting the cutting height (See Fig. H)

Press and hold Cutting-height adjustment lever.

Adjust the cutting height up and down.

WARNING! Stop, release operating bail and

wait until the motor stops before adjusting

height. The blades continue to rotate after the

machine is switched off, a rotating blade can cause

injury. Do not touch rotating blades.

Opening the LED headlight (See Fig. I)

Press the switch button for LED headlight.

AFTER OPERATION:

STORAGE (See Fig. J1, J2)

Stop the mower and always unplug the safety key

and remove the batteries. Clean the exterior of the

machine thoroughly using a soft brush and cloth. Do

not use water, solvents or polishes. Remove all grass

and debris, especially from the ventilation slots.

Turn the machine on its side and clean the blade area.

If grass cuttings are compacted in the blade area,

remove with a wooden or plastic implement.

Store the machine in a dry place. Do not place other

objects on top of the machine.

To aid storage, Press and hold quick-release button

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kress KG756E Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info