Bedienungsanleitung KRK Systems Ergo (Seite 47 von 51) (Englisch)

705170

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

Page | 47

29. Troubleshooting

ERGO does not turn on.

Ensure you have power connected and ERGO is turned on using the power switch on the rear of the unit. Remember

the power can be provided using the supplied power adaptor or from a Firewire port (must be 6-pin or 9-pin)

Most likely you are using a 4 pin (mini) FireWire port. These FW ports are commonly found on PC laptops. You need a

standard 6 pin FW port in order to power ERGO. The 2 pins that are missing are the pins that carry power. The

FireWire port is not supplying enough power for ERGO (can be caused by having multiple Firewire devices connected).

Use the 12VDC power adapter to power up ERGO, and of course check the wall socket is operational.

You do not have, or cannot find the driver for ERGO.

Please download the latest drivers for your operating system from www.krksys.com.

Your computer does not have a 6 pin FireWire port on it.

If you have a 9-pin port you will need to purchase a 9-pin to 6-pin cable in order to use with ERGO. Please ensure you

buy a high quality cable from a well known brand as these are usually built to the 1394 specification and are more

reliable than cheap alternatives.

Your computer doesn’t have a FireWire adapter at all.

In most cases, a FireWire interface can be easily added to a computer. For laptops, you need to look for either a

PCMCIA or ExpressCard based adapter (which one to use depends on the card slot your computer is equipped with).

For desktops, you should use an add-in PCI FireWire card. Please do not use a USB-to-FireWire adapter cable because

it will severely degrade performance. Also avoid cards with multiple interface types as this can also affect

performance.

You are experiencing noise in audio recordings / playback.

This can be many things. Do you hear noise even when there’s no software playback? If so, then the cause is likely a

ground loop (especially if it goes away when running the computer on battery power). Please consult a qualified

electrician if you believe you have grounding issues.

You are experiencing click and pops in audio recordings / playback.

Does increasing the buffering in the driver make the problem go away? If so, then it could be an issue with your

system performance. For guidance in optimizing your computer to playback audio reliably, please read the specific

guides found on the CD or available from www.krksys.com.

Support of 1394 under Windows is a complex issue and there are many hotfix downloads which Microsoft offer for the

various 1394 solutions depending on the manufacturer of the Firewire chipset used on your computer. If you are

experiencing problems with streaming audio, or connectivity issues you search the Microsoft Support database for

any “1394 hotfix” downloads for your operating system. The OHCI driver for your device may also affect performance,

for more information see the specific guides found on the CD or available from www.krksys.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

KRK Systems Ergo Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info