Bedienungsanleitung Krups bw 4108 (Seite 10 von 63) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

377020

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

English

 The light inside the kettle changes colour according to the temperature of the wa

ter(green>cyan>blue>violet>red).

 When the water boils, a beep sounds and the kettle is switched off automatically.

Note:

You may interrupt the heating cycle at any time by pressing the ON/OFF button or

by removing the kettle from its base.

Do not leave water in the kettle after use.

SETTING THE WATER TEMPERATURE

This electronic kettle allows you to heat water to the desired temperature. In order for

the temperature displayed on the panel to be as accurate as possible, ll your kettle

with at least 0.5L of water.

Press the “temperature setting” button (C) several times to display the various

temperatures (50°C, 60°C, 70°C, 85°C) and stop at the desired temperature.

 A red dot lights up below the selected temperature and the selected temperature

ashes on the panel.

 The heating cycle starts and the water level lights up. Each temperature selected

corresponds to a colour of light: cyan for 50°C, blue for 60°C, violet for 70°C and

red for 85°C.

 When the water is heating up, the temperature of the water is displayed on the

digital screen.

Note:

the pre-selected temperature may be modiﬁed at any time by pressing the

“temperature setting button” (C) several times to choose the new temperature.

The heating cycle may be stopped at any time either by removing the kettle from

its base or by pressing the “temperature setting button” (C) several times until it

switches off.

 When the water reaches the pre-selected temperature, a beep sounds.

 A warm cycle will start automatically. The water will be kept at the selected

temperature for 30 min.

 The panel continues to display the temperature of the water.

PURIFYING THE WATER

This electronic kettle has a water purication function. By means of a long boiling

process, the kettle eliminates the bacteria present in the water.

 Press the “water purication button” (D)

 After a normal cycle, the kettle keeps the water boiling for 3 minutes.

 At the end of the purication cycle, a beep sounds and the kettle is switched off

automatically.

Note:

the heating cycle or the puriﬁcation cycle may be stopped at any time either by

removing the kettle from its base or by pressing the “water puriﬁcation button” (D).

ADVANCED USE

Several functions may be combined: For example, you can start a normal boiling cycle

followed by a warm cycle or a purication cycle followed by a warm cycle. The warm

cycle lasts for 30 minutes and keeps the water at the desired temperature.

 Boiling cycle followed by warm cycle

 Select a warm temperature using the “temperature setting” button (C) and then

press the “ON/OFF” button (E).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Krups bw 4108 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Krups bw 4108

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info