SVFI
7
ENGLISH
Caution! When rinsing process is in progress, hot water comes out through the nozzles. Take care
not to be scalded.
!
Caution! Change the setting during grinding.
Never force the grinding fineness setting button.
!
3.3 Preparing the grinder
Adjust the fineness of your coffee grinding to set the strength of your coffee. The finer the grind
setting, the stronger and creamier the coffee will be.
Turn the “Grinding fineness setting” button to set the degree of grinding fineness.
Turn anticlock-
wise for a finer
grind.
Turn clockwise
for a coarser
grind.
You can change the vo-
lume of water at any time
using the rotating button.
Use the rotating
button to select your drink
and confirm by pressing
the OK key.
The drink selection menu
will be displayed.
Put a cup under the
coffee outlets.
You can lower or raise the
coffee outlets to suit the
size of your cups.
!
PREPARING ESPRESSO AND ORDINARY COFFEE
4.1 Preparing an espresso
The quantity of water for an espresso must be between 20 and 70 ml.
Each time you plug your machine in, it will carry out an initialisation cycle.
Press the button, wait for the end of pre-heating and perform a rinsing operation if you wish.
4
Caution! Your appliance is designed to make coffee from coffee beans only.
When you first make coffee with the machine or after a long period of absence or a clea-
ning or scale removal procedure, a little steam and hot water will come out of the steam
nozzle (priming). Splashing or scalding may occur if the coffee outlets are set too high in
relation to the size of the cups.
!
!
-+
Note: To stop coffee flowing into the cup, you can either again press a key or turn the rotating button to reduce
volume.
!
IFU_KR_COFFEEMAKER_EA69xx_0828344_EN 17/06/10 16:51 Page7
