711474

Krups EA815 Seite 28

28
Zoom out
Zoom in
Vorherige Seite
1/144
Nächste Seite
26
Automatic rinsing of the circuits when the machine starts.
■You can choose to program the machine to be rinsed automatically each time it is turned on. To do this, press the
maintenance and settings button (27). Using the navigation button , select the automatic rinsing programming
symbol . Press the button to choose ON which confirms this program. If you press the , button, automatic
rinsing is disabled.
■You can return to the coffee types menu by pressing the button.
Warning : after this rinsing process, hot water will be released from the coffee jet. Ensure that the drip tray is in place
even when the machine is not being used. The cycle lasts only a few seconds and stops automatically.
Cleaning program - total duration: approximately 13 minutes
You do not have to run the cleaning program as soon as the appliance requests it, but it must be done reasonably
soon after. If cleaning is postponed, the alert message will remain illuminated until the process is carried out.
■When the symbol lights up, you can run the automatic cleaning program by pressing the maintenance and
settings button . The symbol is selected. The function indicator is shown above the maintenance button
.
■the automatic cleaning program is divided into 2 stages: the cleaning cycle itself, followed by the rinse cycle. You
can clean the machine at any time by pressing the maintenance and settings button then, using the navigation
button select the cleaning symbol .
■To run this cleaning program, you will need a container which holds at least 0.6 L and which can be placed beneath
the coffee jets and the steam nozzle. The symbol flashes.
■Lift the cup grid (28).
■Insert the KRUPS cleaning tablet (29).
■Fill the water container to its maximum level of 1.7 L (2).
■Empty the coffee grounds collector and the drip tray (23-25).
■Put a 0.6 L container under the coffee and steam jets (30).
■Press START . The symbol becomes constant. The first phase (approximately 10 minutes) begins. When this
phase has finished, empty the container and the drip dray. The symbol flashes. Put the parts back in place.
■Press START . The symbol becomes constant, the final phase (approximately 3 minutes) begins. When this
phase has finished, empty the container and the drip tray. The cycle has finished, the coffee types menu appears.
Note: if you turn off or unplug your machine during cleaning or if there is a power failure, the cleaning program will
start from the beginning of the program once the power is restored to the appliance. It is not possible to postpone
this process. It is obligatory in order to rinse the water circuit. In this case, a new cleaning tablet may be necessary. It
is best to run the full cleaning program in order to avoid any risk of poisoning. The cleaning cycle is irregular: do not
put your hands under the coffee jets while the cycle is running.
Descaling program - duration: approximately 20 minutes
You do not have to run the descaling program as soon as the appliance requests it, but it must be done reasonably
soon after. If descaling is postponed, the alert message will remain illuminated until the process is carried out.
The amount of limescale collected depends on the hardness of your water.
Warning : if your product is fitted with our Claris - Aqua Filter System cartridge, remove the cartridge before descaling.
■When the symbol lights up, you can run the automatic descaling program by pressing the maintenance and
settings button (27). If necessary, using the navigation button, select the symbol. The symbol flashes
and the function indicator is located above the maintenance button .
■To run the descaling program, you will need a container which holds at least 0.6 L and a sachet of KRUPS descaler.
■Fill the water tank up to the CALC mark then pour in the contents of one sachet (31).
■Put a 0.6 L container under the coffee and steam nozzles.
■Press START to begin the first phase (approximately 8 min). The symbol becomes constant. When this phase
has finished, empty the container and the drip dray. The and symbols flash. Remove and clean the water tank
using a sponge.
■Once clean, refill your water tank and replace all parts. The symbol disappears.
■Press START to begin the second phase (approximately 6 min). The symbol becomes constant. When this
phase has finished, empty the container and the drip tray. The symbol flashes.
■ Press START to begin the final phase (approximately 6 min). The symbol becomes constant. When this phase
has finished, empty the container and the drip tray. Descaling is complete.
… 28 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

krups-ea815

Suche zurücksetzen

  • wo sollen die entkalkung und reinigung tabletten hin? Eingereicht am 25-6-2023 07:20

    Antworten Frage melden

  • wo speichert man alles ein an der kaffeemaschiene Eingereicht am 22-8-2022 21:18

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Krups EA815 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info