Bedienungsanleitung Krups EA85 serie (Seite 29 von 170) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Alle Sprachen)

690034

Zoom out

Zoom in

Vorherige Seite

1/170

Nächste Seite

If any of the problems in the table below persist, call KRUPS customer service. See contact

list enclosed.

PROBLEMS AND CORRECTIVE MEASURES

MALFUNCTION CORRECTIVE MEASURES

The appliance indicates a

fault, the software is frozen

or your appliance is mal-

functioning.

Switch off and unplug the appliance, remove the filter cartridge,

wait for one minute and start the appliance again.

The appliance does not

come on after pressing the

Start/Stop button.

Check the fuses and wall socket.

Check that the 2 lead connectors are correctly plugged into the

appliance and into the wall socket.

The grinder is making a

strange noise.

Foreign bodies are present in the grinder.

Disconnect the appliance before any intervention.

Check whether you can extract the foreign body using the suc-

tion from your vacuum cleaner.

The One Touch Cappuccino

block does not suck up the

milk.

The One Touch Cappuccino

block does not make any or

makes little foam.

Check that the block is correctly assembled (particularly the froth set-

ting button and the metal air end piece).

Check that the steam nozzle is not blocked.

Check that the air end piece has not been forgotten and that it is cor-

rectly assembled.

Check that the flexible hose is not obstructed or pierced shaped and

that it is correctly connected to the block to avoid any air entering.

Check that it is properly immersed in the milk.

Rinse and clean the block (see chapters on rinsing and cleaning the

One Touch Cappuccino block).

For preparations made with milk:

We recommend using very fresh, very cold pasteurised or UHT

milk, and we also recommend using a cold container.

The steam nozzle on your

machine appears to be par-

tially or completely blocked.

Dismantle the end piece using the dismantling key. Fig. 23

Start the rinsing cycle of the One Touch Cappuccino block to remove

the rest of the deposits.

Clean the steam nozzle and check that the hole in the end piece is

not obstructed by milk or scale residue. Use the cleaning needle if

necessary.

No steam comes out of the

steam nozzle.

Check that the steam nozzle is not blocked.

Empty the tank and temporarily remove the Claris cartridge.

Fill the tank with calcium rich mineral water (>100 mg/l) and perform

successive steam cycles (5 to 10) into a container until you obtain a

constant flow of steam.

Re-insert the Claris cartridge into the tank.

Steam comes out of the drip

tray grid.

Depending on the type of recipe prepared, steam may come out of

the drip tray grid.

The appliance is asking you

to empty the drip tray even

though it is not full.

The machine is programmed to ask for emptying of the drip tray after

a certain number of coffees, irrespective of the number of times you

may have already emptied the drip tray.

IFU_KR_EA85_EO_0A17613_EA85 10/09/13 11:33 Page31

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Krups EA85 serie Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info