Bedienungsanleitung Krups EVIDENCE EA89011 (Seite 30 von 306) (Alle Sprachen)

672686

Zoom out

Zoom in

Vorherige Seite

1/306

Nächste Seite

Automatic cleaning programs

Automatic cleaning program of the coffee circuit

A message on the screen will indicate when a cleaning program needs to be run for the appliance.

To run this cleaning program, you will need a container which holds at least 0.6 l, and which should be placed beneath

the coffee outlets and the steam nozzle, and a KRUPS cleaning tablet. Fig. 34a. Carefully follow the instructions given

on the screen. It is also possible to run a cleaning cycle via the Maintenance menu.

Important: You do not have to run the cleaning program as soon as the appliance requests it, but it must be

done reasonably soon after. If cleaning is postponed, the alert message will remain illuminated until

the process is completed.

The automatic cleaning program comprises two phases: a cleaning cycle and a rinsing cycle, and lasts about 13

minutes.

Important: If you unplug your machine during the cleaning cycle, or if there is a power failure, the cleaning program

will continue from the current phase when the power is returned. It is not possible to postpone this

process. This is essential to ensure that the water circuit has been correctly rinsed. In this case, a new

cleaning tablet may be necessary. Complete the full cleaning program in order to remove all of the

cleaning product which is harmful to health.

Cleaning the “One Touch Cappuccino” block

To complete a cleaning program, you will require two containers (minimum 0.6 L) and KRUPS cleaning liquid.

You can start the cleaning cycle by pressing button .

Then selecting “Maintenance”  “Milk Cleaning”. Follow the instructions on the screen.

Dismantling the “One Touch Cappuccino” block

In addition to rinsing, it is necessary to clean the different elements of the block every time after using. To dismantle

the block, follow the following instructions:

Remove the milk tube, Fig. 21.

Remove the front lid of the coffee milk nozzles. Slide it downwards and pull it towards you. Fig. 22.

Remove the “One Touch Cappuccino” block by pulling the upper part of the block Fig. 23.

Completely dismantle the block. Fig. 24.

Remove the milk tube connector Fig. 25.

Clean all of the dismantled parts (block, connector and milk tube) with soapy water. Then rinse them in hot water. Fig.

26.

Once the elements are clean and dry, assemble the block and return them to their original position. Fig. 27.

Replace the font lid of the block. Fig. 28. Replace the connector in the milk tube Fig 29 (opposite side of the bevelled

side) and plug in the block. Fig. 30.

Automatic descaling program of the steam circuit

Warning: if your appliance is tted with our Claris - Aqua Filter System cartridge, remove the cartridge before

descaling.

A message on the screen will indicate when a descaling program needs to be run for the appliance. The frequency of

this program depends on the quality of the water used and on whether a Claris Aqua Filter System lter is used or not

(the harder the water, the more often the appliance has to be descaled).

Important: You are not obliged to carry out this program immediately the appliance requests it, but it must be

carried out reasonably soon afterwards. If descaling is postponed, the alert message will continue to

be displayed until the process is completed.

When the descaling alert level is reached and displayed, press to run the descaling program. To delay it, press

Once the procedure has been launched, follow the instructions provided on the screen. It is also possible to run a

descaling cycle via the “Maintenance” menu  “Descaling”.

To carry out a descaling program, you will require a container with a capacity of at least 0.6 L which should be placed

beneath the One Touch Cappuccino block and a KRUPS descaling sachet (40 g). Fig. 34b

Fill the water tank up to the CALC mark then pour in the contents of one sachet of descaler.

The descaling program comprises three phases: a descaling cycle and two rinsing cycles. The program lasts

approximately 20 minutes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Krups EVIDENCE EA89011 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info