Bedienungsanleitung Krups flf 244 pro edition plus (Seite 6 von 22) (Englisch, Französisch, Spanisch)

376206

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Recommendations

• Do not use abrasive pads for cleaning.

• To remove the anti-scale filter, take the kettle

off its base, and leave it to cool. Never

remove the filter when the appliance

contains hot water.

Any connection error will nullify the

warranty.

• The warranty excludes kettles that have

not been maintained properly and

descaled regularly.

• Never use any anti-scaling method other

than that recommended.

Use

• Before first use, rinse the inside of your

kettle, and boil and empty it twice.

• Place your kettle, on the base, on a stable

surface.(1)

Remove the lid by aligning the “∇” mark

with the “open” position and lifting it off

(2). To close the kettle, engage the lid, with

the spout cover set back, by placing the “∇”

mark to “open” and turn it clockwise to the

“lock” position. The protective cover will

block off the pouring spout. (3)

• With the kettle disconnected and removed

from its base, fill it through the spout or lid.

Please observe the minimum and the

maximum fill levels.(4)

• Close the lid (3), and place the kettle on its

base. (5)

• Switch on by pressing the “I” switch. (6)

• The kettle stops automatically as soon as the

water boils.(7)

• You can also switch the kettle off at any

time during the heating process by pressing

the “0” switch. (8)

• To pour, squeeze the release latch under the

handle. (9)

• Empty the water from your kettle completely

after each use.

Cleaning

To clean your kettle:

• Disconnect it and remove it from its base.

• Leave it to cool, and then clean it with a

damp sponge.

To clean the filter (models with filter):

Clean the filter regularly. Rinse it in clean

running water and use a nylon brush when

needed.

De-scaling

• Descale your kettle regularly.

• Use:

1) a descaler specifically intended for PLASTIC

kettles. Follow the manufacturer’s instruc-

tions closely.

2) or commercial white vinegar at 8°C.

Pour 1/2 l of vinegar into the kettle. Leave it

to work for one hour without heating.

3) or citric acid. Boil 0.5 l of water. Add 25 g

of citric acid. Leave it to work for 15

minutes.

• Repeat if necessary.

• If you are using citric acid, always dilute it

with water.

• Whatever method you use, always

empty your kettle and rinse it 5 or 6

times.

• Never descale your kettle when there is

no liquid inside (descaler, citric acid..).

• Before using again, rinse with cold water

then boil (max level) and discard the water

twice without drinking it.

In the event of a problem

• Check :

. the connection,

. that the kettle is correctly positioned on its

base,

. that the switch is in the "on" position by

pressing “I”.

. that the lid is locked in the "lock" position

and that the protective cover is blocking off

the spout

. that the kettle has not been used without

water. In this case:

take the kettle off its base, fill the appliance

with cold water, then try again.

Bouilloire US/F/E .PM6.5 20/09/04, 15:496

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Krups flf 244 pro edition plus Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Krups flf 244 pro edition plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info