672586
18
Zoom out
Zoom in
Vorherige Seite
1/114
Nächste Seite
16
2.1 - ASSEMBLING THE BLENDER
Place the multi-function head (a3) in the horizontal position: press the button (a2)
and manually lower the multi-function head (a3) until it locks (the button (a2) returns
to its initial position).
Unlock the safety cover (a5) from the high-speed outlet (a4) by rotating it anti-
clockwise and then remove it. Fig. 6.
Make sure that the speed selector is in the “0” position.
Carefully place the blade seal (d5) on the blade (d6), t this blade assembly in the
bottom of the jug (d4) (the jug must be upright) and tighten it by turning it one quarter
turn clockwise. Fig. 7a.
Handle the sharp blades with care to prevent injury. Fig. 7b.
Lock the blender jug (d) on the outlet (a4) by rotating it clockwise. Fig. 7c.
Place the food in the blender jug, and lock the lid (d2) tted with the measuring cap
(d1), by rotating it anti-clockwise.
2.2 - USAGE
Start by turning the selector button (a1) to the desired position according to the recipe.
Use the “Pulse” position for better mixing control and for better blending of your preparation.
You can add food through the hole in the measuring cap (d1) during preparation.
To stop the appliance, turn the button (a1) to “0”.
Tips :
You can prepare:
nely blended soups, cream soups, stewed fruit, milkshakes and cocktails.
liquid batter (pancake, fritters, Yorkshire pudding, wafes, clafoutis and custard ans).
If ingredients stick to the sides of the jug during processing, turn off the appliance,
remove the jug and scrape down the ingredients onto the blades using a spatula,
then replace the jug on the appliance so that you can carry on.
Never ll the blender jug with boiling liquid. Only use liquids or foods at simmering
temperatures or below.
Do not use the blender jug when it is empty or with hard and/or dry ingredients (like
ice cubes, sugar, hard spices, coffee beans, etc).
Always use the blender jug with its lid.
Never remove the lid before the blades have stopped completely.
Always pour liquid ingredients into the blender jug rst before adding solid ingredients.
Maximum operating time: 2 min.
2.3 - DISMANTLING THE ACCESSORY
Wait for the appliance to come to a complete stop before removing the blender by
unlocking it in the anti-clockwise direction and put back the cover (a5) by locking it
on the outlet (a4) (clockwise). Fig. 5.2.
3 - FINELY CHOPPING SMALL QUANTITIES (DEPENDING
MODEL)
ACCESSORY USED :
Assembled grinder.
You can use the grinder to :
Chop in a few seconds by pulsing: dried gs, dried apricots, etc.
Quantity / max time: 100g / 5s
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Krups KA303S10 - PERFECT MIX 9000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info