690433
9
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
9
ENGLISH
USING YOUR APPLIANCE
Set the motor unit (A) on a at and stable surface.
Add the ingredients to the blender bottle (B2). The maximum level of 600 ml (refer to
the gauge on the bottle) must not be exceeded. For best results, we recommend rst
lling the bottle with liquid ingredients, then with the fresh or frozen ingredients (cut the
ingredients into a maximum of 2 cm pieces). Do not ll the bottle excessively.
Screw the blade rmly (B1) onto the opening of the blender bottle (B2) (Image 1). Then
place the bottle with the blade on the motor unit, aligning the arrow on the outside of the
blade with the arrow on the edge of the motor unit (Image 2). Then place the vacuum
bottle on the motor unit, aligning the arrow on the outside of the blade with the arrow on
the edge of the motor unit.
Turn on the device. Select a blending function using the selection button:
Blend: 1-minute automatic blending program.
Pulse ice crush: Crushed ice function. It starts each time the “Start Stop” button is
pressed and stops when the button is released.
Vacuum: 50-second automatic program that removes the air in the blender bottle.
Vacuum blend: 1 minute 50 second automatic program that combines the vacuum and
blend functions.
A light appears beside the selected program. Press the central “Start Stop” button to
start the program. Warning: for the programs with the "air out" function, the selector must
be placed above the vacuum bottle (B3) on the “Air out” icon before starting the
program (image 5).
When you have nished blending, unlock the vacuum bottle then the blender bottle from
the motor unit (Image 8 and 9). Warning: for the programs with the "air out" function, the
selector must be placed above the vacuum bottle (B3) on the icon (image 6) before
unlocking the bottles from the motor unit. (image 7) Turn the blender bottle upside
down so that the blade (B1) is at the top and unscrew it from the bottle (B2) (Image 10).
Then position the top on it and screw it in place (C1 + C2). Then position the bottom lid
beneath the bottle (Image 11). You can then drink directly from the blender bottle or take
it with you.
This appliance is not suitable for blending potatoes, cream, egg whites, dough, etc.
The appliance must not be used with hot liquids.
If the motor stops during use, unplug the appliance and remove the bottle (B) from the
motor unit (A). Leave the appliance to rest for at least 10 minutes before reusing.
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Krups KB180 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info