690524
11
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
11
ENGLISH
3. Clean the seal and blade unit carefully (the blade unit only, without the seal, is
dishwasher safe) and replace the seal in the slot on the blade unit. Make sure
that the seal forms a tight seal around the base of the blade unit by pressing
it down with the blunt end of the plastic stick. There is a risk of leakage if the
seal is not correctly replaced.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK
PROBLEMS CAUSE SOLUTIONS
The appliance does
not work.
It is not plugged in. Plug the appliance in using a plug with
the same voltage.
The bottle (B) is not
correctly assembled or
positioned on the motor
unit (A).
Check that the bottle is correctly
assembled; dismantle and assemble
again Fig.1 and Fig.2 and check that it
is far down enough on the motor unit.
Maintain pressure on the blender
bottle assembly (B) during operation
Fig.3.
Excessive vibration. The appliance is not on
a at, stable surface.
Put the appliance on a at stable
surface.
Volume of ingredients is
too high.
Reduce the quantity of ingredients
processed.
Error in assembling the
accessories.
Check that the bottle (B3) is
correctly assembled with the blade
unit(B1+B2).
Leak from the bottle Incorrect positioning
of the seal (B2) on the
blade unit (B1).
Make sure that the seal is correctly
positioned, the lips of the seal should
be visible and it should not be buckled
Handle the blade units (B1) with
care because the blades are sharp.
The blade unit (B1+B2)
is insufciently or
incorrectly locked on the
bottle (B3).
Make sure that the blade unit and the
bottle are tted together correctly.
The blade does not
rotate easily.
Pieces of food are too
big or too hard.
Reduce the size or quantity of the
ingredients processed.
Add liquid to the bottle without
exceeding the maximum level.
Is your appliance still not working?
Contact customer service (see contact details in the separate booklet).
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Krups KB203D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info