4388
9
Zoom out
Zoom in
Vorherige Seite
1/15
Nächste Seite
16 17
•Turn the steam/hot water selector to the
position (21).
Hold the jug while the froth is produced and
make sure the nozzle does not touch the
bottom of the container so as not to prevent
the passage of the steam.
Once the froth has been obtained, reset the
steam/hot water selector to the position
and remove the jug. Add the milk and the
milk froth to the coffee.
Clean the frothing aid and the steam nozzle using a damp cloth immediately
after frothing milk.
•To remove any remaining trace of milk from the steam nozzle, place a container
under the nozzle and turn the steam/hot water selector to the position for a
few seconds.
3. Heating liquids
• Remove the frothing aid.
• Press the steam preselection button
(22).
The «steam» indicator light starts to flash.
When preheating is finished, the «steam»
indicator light will stay on and you can now
start to produce steam.
Hold the container containing the liquid under
the steam nozzle and immerse the nozzle in
the liquid.Turn the steam/hot water selector
to position (23).
When the liquid is hot enough, reset the
selector to the position and remove
the container.
Clean the steam nozzle using a damp cloth
immediately after heating any liquid.
To remove any remaining trace of liquid from
the steam nozzle, place a container under the
nozzle and turn the steam/hot water selector
to the position for a few seconds.
4. Cancelling the steam function and returning to the preparation of
an espresso coffee or hot water.
You can cancel the steam production function in two ways:
After the appliance has produced the steam, turn the steam/hot water selector
to the position .After about ten minutes, the steam production function is
deactivated and the «on/off» and «steam» indicator lights will flash as the
appliance cools down.Then run water through the heating system - See P17.
Or
Should you wish to prepare an espresso coffee immediately after the appliance
has been producing steam:
•Turn the steam/hot water selector to the position and cancel the preselection
of steam by pressing the steam preselection button .
The «on/off» and «steam» indicator lights flash
Do not wait for the appliance to cool down naturally, run some water through the
heating system:-
Running water through the heating system
Place a container under the steam nozzle.
•Turn the steam/hot water selector to the position .
First steam then hot water will come out of the steam nozzle.
The flow of water will stop automatically after a few seconds.
Return the steam/hot water selector to the position .
The indicator lights «on/off», «rinse», «1 normal cup», «1 full-flavoured
cup», «2 normal cups» and «ground coffee» will come on.You can now
prepare an espresso coffee in the usual way.
Preparation of hot water
This appliance can be used to produce hot water for making instant drinks, tea etc.
Place a cup under the steam nozzle and turn the steam/hot water selector to
the position .
Once the cup contains enough hot water, reset the selector to the position .
Emptying the coffee collector and the tank
The coffee collector collects the used ground
coffee and the tray collects any remaining water.
If the indicator light «empty collector»
comes on, slightly lift the tray and remove it
(24).
Empty and clean the coffee collector and
the tray, wait 10 seconds before replacing.
The indicator light «empty collector»
flashes if the tray is not pressed home or
is incorrectly installed.
KRUPS KRUPS
Indicator LightsIndicator Lights
21
22
23
24
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

krups-orchestro-f889

Suche zurücksetzen

  • Hall ich habe dieses Supergerät seit viele jahren doch jetzt will er nicht mehr entkalken? Wer kann mir da weiter helfen...Grüß Donny Eingereicht am 16-4-2020 12:41

    Antworten Frage melden
  • Fehlermeldung : Bohnen einfüllen!
    Bei Krupps Orchestra!
    Obwohl Bohnen drin sind!
    Das Mahlwerk hatte ich auf ,hab aber eine Markierung vergessen zu machen ! Erst hat sie gröber gemahlen dann auf einmal nicht mehr!
    Sie zieht die Bohnen nicht mehr ein! Eingereicht am 6-5-2019 22:13

    Antworten Frage melden
  • Nachdem ich den Wasserbehälter zum auffuellen rausgenommemhabe und wieder gefüllt eingesetzt
    hiess es auf dem Display ständig" Gefäss unter Düse stellen und Heisswassertaste drücken, das konnte ich über Stunden machen und es änderte sich nichts. An was liegt das und wie kann ich den Fehler beheben.
    Eingereicht am 27-9-2017 17:54

    Antworten Frage melden
  • Hallo! Die lampe für die reinigungsvorrichtung blinkt. Hab achon entkalkt und alles sauber gemacht. Hat jemand einen tipp was da abhilfe schafft? Danke im vorraus Eingereicht am 5-4-2017 12:42

    Antworten Frage melden
  • Wie kann man an der krups Orchetro die Bezüge abrufen
    Eingereicht am 8-3-2017 10:59

    Antworten Frage melden
  • Hallo.kaffeemaschine zeigt mir ständig den Fehler bohnen auffüllen,bohnen sind aber voll.irgendeine idèe wie ich das weg bekomme.Anleitung ist dabei nicht hilfreich.gruß steffi Eingereicht am 15-10-2016 18:32

    Antworten Frage melden
    • Mein Pferd ist auch immer das lustigste am Start!
      Nein, Spass bei Seite, diese hier hat keine Anzeige wenn keine Bohne mehr "inside" ist.
      Lediglich Tresterbehälter voll. u.a...
      didi Beantwortet 15-10-2016 23:16

      Finden Sie diese Antwort hilfreich? Antwort melden
    • Ich gehe davon aus, das sie nach wie vor noch recht guten Kaffee fertigt.
      Dann will sie lediglich eine Reinigung mit Pille ( nach 180 Spülungen oder entnahme von 250 Kaffe).
      Netzstecker stecken lassen, Maschine ausschalten,Dampfhahn auf Position O stellen.
      Unterste Taste (mit Symbol Löffel ) ca.3 sek. drücken!
      Krups schaltet sich jetzt automatisch ein.
      1 1/2 Lit. Wasser einfüllen...Kaffetresterbehälter leeren usw...wichtig! Deckel während des Reinigungsvorgangs offen lassen...Vorgang braucht ca. 15 min.. Den LED -Anweisungen folgen..
      MfG didi Beantwortet 16-10-2016 at 00:14

      Finden Sie diese Antwort hilfreich? (6) Antwort melden
  • hallo,
    habe eine Krups Orchestro Sizliano und diese entkalkt, aber jetzt kann ich den Entkalgungsvorgang nicht abschließen. Die Maschine spült immer wieder, aber ich kann den Vorgang nicht beenden. Was kann ich da tun? Vielen Dank im voraus. Eingereicht am 3-3-2015 14:42

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Krups ORCHESTRO F889 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Krups ORCHESTRO F889

Krups ORCHESTRO F889 Bedienungsanleitung - Deutsch - 24 seiten

Krups ORCHESTRO F889 Bedienungsanleitung - Englisch - 69 seiten

Krups ORCHESTRO F889 Bedienungsanleitung - Holländisch - 24 seiten

Krups ORCHESTRO F889 Bedienungsanleitung - Französisch, Spanisch - 69 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info