Bedienungsanleitung Ksenia Lares 4.0 (Seite 56 von 58) (Englisch)

693399

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

rev. 0/2018

lares 4.0 PROGRAMMING MANUAL

Voice messages

From the Web Server installer 1.5.1 version it is possible to generate voice messages even in local connection with the

control panel, which is not feasible with the previous versions that required Online connection with the Secureweb

portal.

If you already have a Loquendo USB key, just add some ﬁles by downloading them from the reserved area in compressed

format (Update Loquendo_lares4.zip).

Once the ﬁle has been downloaded, it must be decompressed on the main root of the USB key: at this point the key is

ready for use with Lares 4.0 and this operation must not be repeated again.

Listen

The main window displays the voice messages generated and subdivided into sub-categories (events, zones, partitions, etc.)

voice message available for download.

voice message downloaded and ready to be listened to.

Generate

• To generate voice messages via an online connection through the Secureweb portal, you must have an activated

Loquendo license, provided on a scratch card (purchased separately "one-off").

• To generate voice messages in the peer-to-peer mode with the control panel, you must perform the following steps

instead:

1. Access the control panel with a local connection (refer to the manual supplied with the product), in the

unencrypted mode (so in http instead of https). To change the default setting, you need to access the control panel

conﬁguration, and in Section "Options” "Network" then in section "Web Server" and under "Protocol" select

the "None" Mode (port 80).

2. Exit the internet browser.

3. Connect the USB key to the PC, turning off the ﬁrewall that may prevent communication with the USB key

4. Open the ﬁle folder on the USB key and previously extracted from the .zip ﬁle.

Manually start the server by double-clicking the executable lares-4-win in Windows or lares-4- mac on MAC.

5. Log in to the control panel with a local connection again.

6. In the voice messages section there is the menu section for voice message generation.

7. At the end of the voice messages generation, if desired, it is possible to restore the connection to the encrypted

mode.

The system header is set to "Options" "Voice Messages".

At this point we can ﬁnd two states:

The programming could be changed, regenerate the messages.

Appears when messages have not yet been generated or have been created previously but in the meantime the

conﬁguration has been changed.

To generate voice messages:

1. select a voice (requires a Loquendo license).

2. click on (

)

Congratulations, all the voice messages are aligned.

This appears as soon as all the voice messages have been correctly generated. You cannot generate them again unless

you make some conﬁguration changes (zones, partitions, etc.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ksenia Lares 4.0 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info