693402
65
Zoom out
Zoom in
Vorherige Seite
1/82
Nächste Seite
65
Network Camera
User Manual
Settings interface. For detailed information, please refer to Section 6.6.3.
•Record Triggered by Motion & Alarm
If you select Motion & Alarm, the video will be recorded when the motion and
alarm are triggered at the same time.
Besides configuring the recording schedule, you have to configure the settings on
the Motion Detection and Alarm Input Settings interfaces. Please refer to Section
6.6.1 and Section 6.6.3 for detailed information.
•Record Triggered by Motion | Alarm
If you select Motion | Alarm, the video will be recorded when the external alarm is
triggered or the motion is detected.
Besides configuring the recording schedule, you have to configure the settings on
the Motion Detection and Alarm Input Settings interfaces. Please refer to Section
6.6.1 and Section 6.6.3 for detailed information.
3)Check the checkbox “Select All” and click “Copy” to copy settings of this day to
the whole week. You can also check any of the checkboxes before the date and click
“Copy”.
4)Click “Ok” to save the settings and exit the Edit Record Schedule interface.
6. Click “Save” to save the settings.
7.3 CONFIGURING SNAPSHOT SETTING
PURPOSE
You can configure the scheduled snapshot and event-triggered snapshot. The captured
picture can be stored in the SD card (if supported) or the netHDD (For detailed
information about netHDD, please refer to Section 7.1 Configuring NAS Settings). You
can also upload the captured pictures to a FTP server.
• Basic Settings
STEPS
1.Enter the Snapshot Settings interface:
Configuration > Advanced Configuration > Storage > Snapshot
2.Check the Enable Timing Snapshot checkbox to enable continuous snapshot.
2.1.Select the quality of the snapshot.
3.Select the quality of the snapshot. Check the Enable Event-triggered Snapshot
checkbox to check event-triggered snapshot.
3.1.Set the time interval between two snapshots.
4.Click “Save” to save the settings.
Uploading to FTP
You can follow below configuration instructions to upload the snapshots to FTP.
Downloaded from www.Manualslib.com manuals search engine
65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ksenia Network Camera Cube wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info