Bedienungsanleitung Kubota B2320 (Seite 12 von 88) (Englisch)

639537

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

SAFE OPERATION4

1. Disengage the PTO, lower all implements to the

ground, place all control levers in their neutral

positions, set the parking brake, stop the engine, and

remove the key.

2. Make sure that the tractor has come to a complete

stop before dismounting.

3. Avoid parking on steep slopes, if possible park on flat

ground, if not, park across a slope, always with

attachment on the ground.

1. Wait until all moving components have completely

stopped before getting off the tractor, connecting,

disconnecting, adjusting, cleaning, or servicing any

PTO driven equipment.

2. Keep the PTO shaft cover in place at all times.

Replace the PTO shaft cap when the shaft is not in

use.

3. Before installing or using PTO driven equipment, read

the manufacturer's manual and review the safety

labels attached to the equipment.

4. When operating stationary PTO driven equipment,

always apply the tractor parking brake and place

chocks behind and in front of the rear wheels. Stay

clear of all rotating parts. Never step over rotating

parts.

1. Use the 3-point hitch only with equipment designed for

3-point hitch usage.

2. When using a 3-point hitch mounted implement, be

sure to install the proper counterbalance weight on the

front of the tractor.

3. When transporting on the road, set the implement

lowering speed knob in the "LOCK" position to hold the

implement in the raised position.

Before servicing the tractor, park it on a firm, flat and level

surface, set the parking brake, lower all implements to the

ground, place the gear shift lever in neutral, stop the

engine and remove the key.

1. Allow the tractor time to cool off before working on or

near the engine, muffler, radiator, etc.

2. Always stop the engine before refueling. Avoid spills

and overfilling.

3. Do not smoke when working around battery or when

refueling. Keep all sparks and flames away from

battery and fuel tank. The battery presents an

explosive hazard, because it gives off hydrogen and

oxygen especially when recharging.

4. Before "jump starting" a dead battery, read and follow

all of the instructions. (See "JUMP STARTING" in

"OPERATING THE ENGINE" section.)

5. Keep first aid kit and fire extinguisher handy at all

times.

6. Do not remove radiator cap while coolant is hot. When

cool, slowly rotate cap to the first stop and allow

sufficient time for excess pressure to escape before

removing the cap completely. If the tractor has a

coolant recovery tank, add coolant or water to the tank,

not the radiator. (See "Checking Coolant Level" in

"DAILY CHECK" in "PERIODIC SERVICE" section.)

3. PARKING THE TRACTOR

4. OPERATING THE PTO

(1) PTO Shaft cover

(2) PTO Shaft cap

(A) "NORMAL POSITION"

(B) "RAISED POSITION"

5. USING 3-POINT HITCH

(1) 3-point hitch lowering speed knob (A) "FAST"

(B) "SLOW"

6. SERVICING THE TRACTOR

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kubota B2320 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info