Bedienungsanleitung Kubota BX25DLB (Seite 19 von 143) (Englisch)

639486

Zoom out

Zoom in

Vorherige Seite

1/143

Nächste Seite

-9SAFE OPERATION

BACKHOE

Most backhoe equipment accidents can be avoided by following simple safety precautions.

These safety precautions, if followed at all times, will help you operate your backhoe safely.

1. Read and understand all precautions in this manual

before service or operation. Allow only trained

personnel to operate or service this equipment.

2. It is the owner’s responsibility to ensure that anyone

who will operate the backhoe reads this manual first

and becomes familiar with the safe operation of the

backhoe.

3. For safe operation, check the mounting bolts for

tightness and that the mount levers are in the right

position before operation.

4. Never operate tractor with backhoe attached and

loader removed.

5. Check for buried material such as electrical,

telephone, gas and water lines. When in doubt,

contact local utility companies for their buried location

prior to operating the backhoe.

6. Replace any safety decal that becomes damaged, lost

or illegible. Also renew all decals when repainting.

1. Do not allow anyone other than the operator on the

unit while in operation or transport.

2. Keep all person and animals away from swing area of

backhoe.

3. Use care when operating on slopes to avoid tip-over.

Travel at a speed compatible with safe operation,

especially when operating on uneven terrain, crossing

ditches or while turning.

4. Operate the backhoe from the backhoe operator's seat

only.

5. When using on slopes, one stabilizer may be lower

than the other. Use extreme care during excavation as

risk of tip-over will increase.

6. To reduce the risk of tip-over on a slope, place the

spoil to the high side of the excavation.

7. Do not dig under the stabilizer or tractor, especially in

soft or sandy condition. Take extra precaution in wet or

thawing ground.

These conditions can become unstable and may

collapse under the weight of the machine and may

cause tip over.

8. Never operate the machine or any equipment while

under the influence of alcohol or other drugs, or while

fatigued.

9. When leaving the machine unattended, be sure to

lower the backhoe to the ground. Set the parking

brake, then shut the engine off and remove the key.

1. Raise and center the boom, close the dipperstick, curl

the bucket and engage the boom and swing locks

before transporting the machine.

2. Check the local codes or regulations that may apply to

tractor / loader / backhoe operation on public streets or

highways, before transporting or traveling. Use SMV

emblem and warning flashers as required.

(SMV : Slow Moving Vehicle)

1. Before disconnecting hydraulic lines, relieve all

hydraulic pressure by moving the controls.

2. Always use personal protection device such as safety

goggles and ear protection when servicing or repairing

the machine.

3. Lower the backhoe to the ground and shut the engine

off before servicing.

4. When servicing or repairing pins in cylinder ends,

bucket, etc., always use a brass drift and hammer.

Failure to do so could result in injury from flying metal

fragments.

5. To avoid serious personal injury, keep clear of working

area of the backhoe.

6. When servicing or checking underneath, do not get

under the machine while it is being held with only the

bucket, backhoe or stabilizers. Securely support with

jack stands.

7. For your safety, do not work under any hydraulically

supported machine elements. They can settle,

suddenly leak down, or be accidentally lowered.

8. Escaping hydraulic fluid under pressure can have

sufficient force to penetrate the skin, causing serious

personal injury. Before applying pressure to the

system, be sure that all connections are tight and that

lines, pipes and hoses are not damaged. Fluid

escaping from a very small hole can be almost

invisible. Do not use hands to search for suspected

leaks, use a piece of cardboard or wood. If injured by

escaping fluid, see a doctor at once. Serious infection

or allergic reaction will develop if proper medical

treatment is not administered immediately.

9. Do not tamper with any backhoe control valve relief

pressure setting. The relief valve pressure is preset at

the factory. Changing the setting can cause

overloading of the backhoe and the tractor, and

serious personal injury or death may result.

10.Do not modify the backhoe for any reason. Modifying

the backhoe can cause an unstable condition of the

tractor / loader / backhoe combination and serious

personal injury or death may result.

1. BEFORE OPERATING BACKHOE

2. OPERATING THE BACKHOE

3. DRIVING THE TRACTOR ON THE ROAD

4. SERVICING THE BACKHOE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kubota BX25DLB Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info