Bedienungsanleitung Kuppersbusch EEB 6850.0 (Seite 8 von 26) (Englisch)

661118

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

EEB 6850.8

Automatic cooking

Touch to turn the oven on.

Touch the symbol . This will light up in red.

The right display will show the

different automatic cooking

recipes available with the oven:

The name of the recipe will

appear on the left display.

Turn the function selector to

the right or left to select the

desired recipe. Then press the

function selector.

You will hear a double beep conﬁ rming the recipe that you have

chosen. The oven will begin cooking and in most cases you will see the

following information on the display:

The symbol for the chosen recipe and

its automatic cooking temperature are

shown. The pre-programmed weight for

this option ﬂ ashes.

Turn the function selector to change the weight of the food that is to be

cooked.

Finally, press the function selector to accept the selection.

You will hear a double beep conﬁ rming

the programmed recipe. The oven will be-

gin cooking and you will see the following

information on the display:

The symbol for the chosen recipe, the automatic cooking temperature

and calculated cooking time will be shown.

Important information about automatic cooking

with recipes

When you select a recipe and enter a weight, the oven automatically cal-

culates the temperature and cooking time needed, but these values can

be changed. Cooking time starts from a cold oven unless pre-heating

has been speciﬁ cally indicated.

It is very important to select the correct food weight so that the ingre-

dients will be properly cooked.

When cooking with a thermoprobe, the oven will determine the cooking

temperature only. The cooking time will depend on the temperature

setting programmed for the thermoprobe.

With roasting programmes, after a certain time has passed the oven will

advise you that the joint of meat should be turned over. When it is time

to do this, the oven will beep.

You will also see on the display

until you have turned the roast over. If

you do not turn the roast over, the oven

will continue cooking according to the

programmed automatic cooking recipe.

The oven should be pre-heated for white and rye bread and thin-crust

and thick-crust pizza base recipes. In this way the oven will be at the

ideal temperature for the best results. Pre-heating is not needed for the

other recipes.

Follow these instructions when cooking with these recipes:

– Set the recipe ﬁ rst. The oven will begin pre-heating.

Do not put the food into the oven until the signal is given.

– During pre-heating, the symbol of the programmed recipe and the

symbol

will ﬂ ash on the display.

– When the set temperature is reached, the oven will beep. You can now

put the food into the oven.

– The oven will continue to beep until you put the food in.

– The food will be cooked automatically according to the recipe settings.

Changing the weight of the food to be cooked

If you wish to change the food weight, the cooking time or tempe-

rature may change automatically according to the parameters of the

programmed recipe. To change the weight of the food:

Touch . This will light up in red.

The display will show and the

weight of the food to be cooked

according to the recipe you have

programmed.

Turn the function selector to change the weight of the food that is to be

cooked.

Finally, press the function selector to accept the selection.

Changing the cooking temperature

The cooking temperature is pre-programmed for all cooking functions.

It is only possible to adjust the temperature within a predetermined range

when using the automatic cooking function. The temperature can be freely

selected for conventional cooking functions in a range between 50°C

(no temperature adjustment) and 250°C.

If you want to change the cooking temperature:

Touch . This will light up in red.

You will see the symbol and the set

temperature for this cooking function

on the display.

Turn the function selector to specify the new cooking temperature.

Press the function selector to accept the selection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kuppersbusch EEB 6850.0 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kuppersbusch EEB 6850.0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info