6 7
Grilling Rack with Lifter to Insert in the Dripping Pan
This is how to set the automatic switch-on
and switch-off:
• Press
: the lamp
will flash and “0.00”
will appear in the
display.
• Use +/– to set the
cooking time in hours
and minutes. (For
example: 90 minutes).
• Press
: to confirm
the imput and select
the finish time. The
display will show a
time (finish time if the
oven is to switch on
right away).
• Use + to set the
finish time.
After approx. 3 secs.
the lamps will stay
on continously. The
display will show
“Auto” until the oven
switches on.
• Set the temperature and mode.
• The oven will
automatically switch
on at the specified
time and both lamps
next to the display
will flash alternately.
The time remaining until switch-off will be
shown in the display.
The grilling rack is inserted in the drip pan.
With the lifter you can remove the grilling rack
together with the drip pan from the oven.
Nothing drips and you can easily serve.
Removing and refitting the oven door
Removing the oven door
– Open the oven door as far as it will go.
– Insert the locking pins enclosed into the
drilled holes of the door hinges.
– Grasp the oven door at both sides and lift it
up until it is nearly closed.
– Gently lift the door and pull the hinges
forward away from the door opening.
Important! Risk of injury!
Do not pull the locking pins out of the drilled
holes. The hinge is under tension. It must also
be under tension on installation. Once the pins
have been removed it is no longer possible to
tension and secure the hinge.
Refitting the oven door
– Grasp the oven door at both sides and slide
the hinges into the openings on the oven.
The hinge will click into place.
– Slowly open the oven door until it is fully
open.
– Remove the locking pins from the drilled
holes of the door hinges again.
– Close the oven door.
