Bedienungsanleitung Kuppersbusch EHC 620.8 (Seite 10 von 18) (Englisch)

663516

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

EBC/EHC 620.8

EBC 615.8

Electronic clock

Setting/changing the time

The clock must be set before ﬁrst-time oven use and after any interrup-

tion to the power supply. The oven will only work once the clock time

has been set. If the clock time is not set, the digits and the word AUTO

on the left of the display will ﬂash.

To set the clock:

– Push the + and – controls at the same time

for a few seconds. The · symbol between

the digits will begin to ﬂash.

– Set the correct time with + and – controls.

The clock will start after 30 seconds and

the · symbol will stop ﬂashing.

Setting the minute minder

The minute minder will not turn off the oven.

– Press MODE

once until the signal ﬂas-

hes.

– Adjust the duration with + and – for the desi-

red hours and minutes you want the alarm to

sound after. After a short wait the signal

will go on and the minute minder will start to

work.

– After the set time has elapsed, an alarm will sound and the will start

to ﬂash.

– Press any key to stop the alarm.

If the alarm is not stopped, it will turn off by itself after 2 minutes.

Setting the cooking duration timer

– Press MODE twice until the letters “dur”

appear and the AUTO control symbol ﬂashes

on the left of the display.

– Set the desired duration on the timer with +

and – for the hours and minutes after which

you want the oven to switch off. After a short

wait the AUTO control symbol will come on.

The timer shows the current time.

– After 6 seconds the function will switch itself on.

You can see the remaining cooking time by pressing MODE . This

time can be changed by pressing + or –.

– Choose the heat and temperature settings.

– Once the set time has elapsed, the oven will turn itself off. An alarm will

sound and the AUTO control symbol will start to ﬂash.

– Press any key to stop the alarm. The AUTO control symbol will conti-

nue to ﬂash.

– To turn the oven off completely turn all controls to 0 and press MODE

. The control symbol will appear between the digits.

Setting the cooking end timer

– Press MODE three times until the word

“END” appears and the AUTO control sym-

bol ﬂashes on the left of the display.

– Use + and – to set the desired time for co-

oking to end. After a short wait the AUTO

control symbol will come on. The timer

shows the current time.

– After 6 seconds the function will switch itself on.

You can see the set cooking end time by pressing MODE . This time

can be changed by pressing + or –.

– Choose the heat and temperature settings.

– The oven will turn off immediately once the time set for cooking to stop

is reached. An alarm will sound and the AUTO control symbol will start

to ﬂash.

– Press any key to stop the alarm. The AUTO control symbol will conti-

nue to ﬂash.

– To turn off the oven completely, turn all controls to 0 and press MODE

. The control symbol will appear between the digits.

Setting the automatic cooking start and end timer

– Press MODE twice until the letters “dur”

appear and the AUTO control symbol ﬂashes

on the left of the display.

– Set the desired duration in hours and minu-

tes by pressing + and –. After a short wait the

AUTO control symbol will come on.

– Press MODE

until the word “END” appears

and the AUTO control symbol ﬂashes on the

left of the display.

– Use + and – to set the desired time for coo-

king to end. After a short wait the AUTO con-

trol symbol will come on. The timer shows the

current time.

– Choose the heat and temperature settings.

– The oven will remain off and the AUTO control lamp will come on. The

oven is now programmed.

– When it is time for the cooking to start, the oven will turn on automa-

tically and will cook for the set duration. The

control symbol will

appear between the digits.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kuppersbusch EHC 620.8 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kuppersbusch EHC 620.8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info