OPERATING THE WHEELCHAIR
28
8.4 OVERLOAD PROTECTION
The overload protection switch pops out and cuts off the
power if the motor(s) becomes overloaded while trying
to climb over too high an obstacle, such as a threshold
or trying to climb too steep of an incline.
If the motor(s) overload, the following happens:
• The wheelchair stops and the overload trip pops out.
To rectify this:
Locate the overload protection trip (in front of the rear
lifting handle to the right) and press it in firmly to reset.
Switch the wheelchair on and reverse away from the
obstacle and then avoid the obstacle.
8.5 SWITCHING ON THE HORN
Press the horn button.
It will sound for as long as you hold the button down.
