Bedienungsanleitung Kymco Super 8 - 150 (Seite 46 von 56) (Englisch)

598326

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

MAINTENANCE

STORAGE GUIDE

Extended storage, such as for the winter months, requires that you

take certain steps to reduce the effects of deterioration from the

non-use of your scooter. Whenever possible, perform any neces-

sary periodic maintenance or repairs before storage so the scooter

will be in good condition for riding when it is removed from storage.

Storage

1. Change the engine oil and filter.

2. Drain the carburetor (if equipped) and empty the fuel tank

into an approved gasoline container using a commercially

available hand siphon or an equivalent method. Spray the

inside of the tank with an aerosol rust-inhibiting oil. Close

the fuel filler cap on the fuel tank

Gasoline is highly flammable and explosive. You can be

burned or seriously injured when handling fuel. Stop the

engine and keep heat, sparks, and flame away. Refuel

the scooter outdoors and wipe up any spills immediately.

Crank the engine several times to distribute the oil.

Reinstall the spark plug and spark plug cap.

5. Remove the battery. Store it in an area protected from freezing

temperatures and direct sunlight. Slow charge the battery once

a month (use a quality charger designed for use on a mainte-

nance-free type battery).

6. Wash and dry the scooter. Wax all painted surfaces. Coat the

chrome or bare aluminum parts with rust inhibiting oil.

7. Inflate the tires to their recommended pressures. Place the

scooter on blocks to raise both tires off the ground.

8. Cover the scooter (don't use plastic or other coated materials)

and store in an unheated area, free of excessive moisture,

with a minimum of daily temperature variation. Do not store

the scooter in direct sunlight, as the sun's UV rays can dam-

age the body work and other components.

Removal from storage

1. Uncover and clean the scooter.

2. Change the engine oil if more than 1 month has passed since

the start of storage.

3. Charge the battery as required (use a quality charger designed

for use on a maintenance-free type battery). Install the battery.

4. Drain any excess aerosol rust-inhibiting oil from the fuel

tank. Fill the fuel tank with fresh gasoline.

5. Perform all the pre-ride inspection checks (see pages 16 -

23).

Test ride the scooter at low speeds in a safe riding

area, away from traffic.

3. To prevent rusting in the cylinder

, perform the following:

Remove the spark plug cap from the spark plug, and use tape

or string to secure the cap to any convenient plastic body part

so that it is positioned away from the spark plugs.

Remove the spark plug from the engine and store it in a safe,

dry place. Do not connect the spark plug to the spark plug cap.

Pour a tablespoon (15 - 20 cc) of clean engine oil into the

cylinder and cover the spark plug hole with a piece of cloth.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kymco Super 8 - 150 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info