Bedienungsanleitung Kyocera ECOSYS P7040cdn (Seite 112 von 258) (Englisch)

684433

112

Zoom out

Zoom in

Vorherige Seite

1/258

Nächste Seite

5-4

Operation on the Machine > What is Document Box?

What is Document Box?

Document Box contains four types of component boxes which provide the following functions.

The following types of document boxes are available.

Custom Box (page 5-6)

Custom Box is a component box which you can create within the Document Box and store data for later retrieval. You

can create or delete a Custom Box, and manipulate data in various ways as described below:

Job Box

This is a box to save jobs executed from a PC.

Private Print/Stored Job Box (page 4-10, page 4-12)

In Private Printing, you can specify that a job is not to be printed until you operate the machine. When sending the job

from the application software, specify a 4-digit access code in the printer driver. The job is released for printing by

entering the access code on the operation panel, ensuring confidentiality of the print job. The data will be deleted upon

completion of the print job or after the power switch is turned off.

In Stored Job, the print data sent from the application is saved to the machine. You can set up an access code as

necessary. If you set up an access code, enter the access code when printing. Print data will be stored in the Job Box

after printing. This will allow printing of the same print data repeatedly.

Quick Copy/Proof and Hold Box (page 4-14, page 4-16)

Quick Copy feature facilitates additional prints of a document already printed. Activating Quick Copy and printing a

document using the printer driver allow the print data to be stored in the Job Box. When additional copies are required,

you can reprint the required number of copies from the operation panel. By default, up to 32 documents can be stored.

When power is turned off, all stored jobs will be deleted.

The Proof and Hold feature produces only a single proof print of multiple-print job and holds printing of the remaining

copies. Printing a multiple-print job in Proof and Hold using the printer driver allows only a single copy to be printed while

maintaining the document data in the Job Box. To continue to print the remaining copies, use the operation panel. You

can change the number of copies to print.

Creating a New Custom Box (page 5-6)

Storing Documents (page 5-8)

Printing Documents (page 5-9)

Editing Documents (page 5-10)

Deleting Documents (page 5-11)

NOTE

To use Custom Box, an optional SSD must be installed in the machine.

NOTE

• You can set up the machine so that temporary documents in job boxes are automatically deleted.

JobRet. Deletion (page 4-18)

• For details on operating the Job Box, refer to the following:

Printing Data Saved on the Printer (page 4-9)

NOTE

When you attempt to store documents in excess of the above maximum, the oldest document data will be overwritten

by the latest document data.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera ECOSYS P7040cdn Seite 112

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kyocera ECOSYS P7040cdn

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info