Bedienungsanleitung Kyocera fine cam sl 300 r (Seite 132 von 134) (Englisch)

288535

132

Zoom out

Zoom in

Vorherige Seite

1/134

Nächste Seite

7-10

Appendix

EV (Exposure Value)

An EV is a number that denotes exposure. EV=1 when the aperture setting is F1 and the

shutter speed is 1 second. Each time the exposure then halves, the EV number increases

by 1 (EV=2, EV=3...).

Conversely, when the exposure is double the EV=1 level, the EV becomes -1. When the

exposure is doubled again, EV=-2, and so on.

In general parlance, when we “change the exposure by 1 step” we are in fact referring to

this EV.

Exposure

This refers to the light of the image projected through the lens striking the camera’s CCD or

film for the optimum amount of time only. Generally speaking, exposure refers to the

combination of shutter speed and aperture setting that will give the correct image.

Flash

This is a device that produces a bright flash of light by releasing an internally stored high-

voltage current. Flash units use relatively large amounts of power and tend to deplete the

camera battery if used frequently.

Focal length

This is the distance from the center of the lens (secondary focal point) to the plane onto

which the image is projected (focal plane) when the image of a subject at an infinite distance

from the camera is clearly focused. The focal length of a lens relates to its magnification,

with longer focal lengths giving more enlarged images of distant objects.

Focus

This term refers to the focal point of a lens, but is more broadly used to refer to the condition

whereby the subject of a photograph is seen most clearly. When the focusing is correct and

the subject is clearly visible, the shot is said to be “in focus”. When this is not the case, the

shot is “out of focus”.

Format

The initialization of a memory card.

Infinity

Once the subject of a photograph is further than a set distance away from the camera lens,

moving still further away requires no adjustment to the focus. The distance at which the

subject is so far away that no change in the focus occurs is referred to as “infinity”.

Initialization (formatting)

This is a process that organizes the internal structure of a memory card so that data can be

recorded on the card. Initialization erases all the existing files on a memory card.

ISO (sensitivity)

This is a number that indicates the sensitivity of film to light, with higher values indicating

greater sensitivity. This is generally expressed as “ISO 100”, etc. Film with higher ISO

sensitivity is more sensitive to light and can be used to take pictures in low-light conditions.

Even in digital cameras, which do not use film, sensitivity is still expressed in terms of ISO

numbers.

JPEG (Joint Photographic Experts Group)

This is a file format used for compressing and saving color images. The compression ratio is

variable, with higher compression ratios giving smaller image file sizes but poorer image

quality.

Finecam_E.book Page 10 Thursday, August 28, 2003 6:21 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera fine cam sl 300 r Seite 132

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info