Bedienungsanleitung Kyocera Finecam M400R (Seite 12 von 186) (Englisch)

495639

Zoom out

Zoom in

Vorherige Seite

1/186

Nächste Seite

Introduction Getting Ready

Taking Pictures

Playback Set Up

GB-12

What Your Camera Can Do

Nomenclature

Names of the menus and icons shown on the screen

LED display

FCC

Compliance Statement for American Users

Handling Precautions

NEXTBACK

Contents (Top page) Detailed Contents Index Nomenclature Menus and Settings Troubleshooting

CAUTION

• Do not direct the camera lens directly toward the sun when shooting, since the

CCD element may be damaged.

• Clean the camera well after using it at the beach or other locations subject to

large concentrations of sand or dust. Salt air may promote corrosion of metal

components and damage or short circuits in electronic parts, causing the

camera to emit smoke or catch fire. Sand inside the camera may result in

internal damage and operating malfunctions.

• If the camera is brought quickly from a cold place to a warm room,

condensation may form on the lens and internal parts. Such condensation

may result in damage or short circuits in electronic parts, causing the camera

to emit smoke or catch fire. Whenever possible, avoid subjecting the camera

to sudden changes in temperature.

• When taking the camera overseas or using it to record

important events, check its operating condition and take test

pictures beforehand to confirm proper operation.

• This camera is a precision electronic instrument, and should be protected

from impacts and falls that might cause damage to internal parts or the

emitting smoke and ignition by the shorting of circuitry.

• This camera is an electronic device which uses a high-performance IC. During

use, the camera may grow warm due to heat emitted by IC. While this is

normal, note that holding the camera for long periods risks low temperature

burns.

• This camera is not designed to be waterproof, and cannot be used in the rain

or under water. If the camera should inadvertently be exposed to water, it

should be taken quickly to a Kyocera/Yashica Service Center for inspection.

• Take great care to keep the photography lens and light sensor clean since

soiling such as fingerprints can affect the accuracy of the camera's metering

and focusing functions. If these areas become soiled and require cleaning,

wipe them gently with a third-party lens cleaning cloth. Any dust should be

removed using a blower or lens brush.

• Clean the camera body by wiping with soft cloth. Never use benzene, thinner,

or other volatile solvents or cleansers, since such substances will damage the

body materials.

• Do not remove the SD memory card or MultiMedia Card (MMC) while the card

access LED is flashing (e.g. immediately after photography or playback).

• Interference may occur in recorded or played back images when the camera

is used in areas subject to strong electromagnetic interference (e.g., near a

television set or stereo speakers).

• If the camera is dropped, it may be damaged internally or parts may have

been dislodged even when there is no visible external damage. The camera

must be taken to a Kyocera/Yashica Service Center for checking.

• Do not attempt to touch the insides of the memory card slot, since damage or

malfunction may result.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera Finecam M400R Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info