Bedienungsanleitung Kyocera FS6020 (Seite 13 von 110) (Englisch)

20377

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

Chapter 1 Using the Operator Panel

1-3

The following indicators light during normal operation and

when the printer needs attention.

The operator panel keys are used to configure the printer.

Note the certain keys have the secondary function.

Settings made with these keys effect only the interface currently

in use.

* When the message display indicates Ready, pressing the

MENU key while holding down the ENTER key shows the

menu AdministrationID on the message display. This

menu is exclusively intended for administrator’s settings

purposes. If this message appears, press the MENU key to

return the message to Ready.

Operation Indicators

Indicator Description

Flashing: Indicates when an error

occurs that you can clear by yourself.

Lit: Indicates that the printer is on-line.

The printer prints received data.

Off: Indicates that the printer is off-line.

Data can be received but will not be

printed. Also indicates when printing is

automatically stopped due to occurrence

of an error.

Flashing: Indicates data transfer is

taking place.

Lit: Indicates either that data is being

processed, or that data is being written

to the memory card.

Flashing: Indicates when the printer

needs maintenance attention or the

printer is warming up (Please wait).

Lit: Indicates when a problem or an error

occurs that you can clear by yourself.

(For example, a paper jam occurs.)

Keys

NOTE

CANCEL

ENTER

Key Function

•Switches the printer on-line and off-

line.

•Prints and feeds out one page.

•Used to release certain errors.

•Cancels a printing job.

To cancel, proceed as follows:

1Check if Processing is displayed

in the message display.

2Press the CANCEL key.

3 Print Cancel? appears in the

message display followed by the in-

terface to be cancelled.

Parallel

USB

Serial

(appears only when the option-

al serial interface board [IB-11] is in-

stalled)

Option

(appears only when an option

network interface card is installed)

Press the

CANCEL

key again to abort

the cancellation.

4 Select the interface to cancel using

the or key and then press the

ENTER key. Printing from the

selected interface will stop.

Cancelling data appears in the

message display and printing stops

after the current page is printed.

•Resets numeric values, or cancels a

setting procedure.

•Used to stop the sounding of the

alarm buzzer indicating an error.

Used to access a desired item or enter

numeric values. In some of the control

procedures, the and keys are used

to enter or exit a sub-menu.

Used as the key in the mode

selection function.

•Used as the key in the mode

selection function.

•Displays online help messages on the

message display when paper jam

errors occur. When pressed in the

Ready condition, displays

explanations of online help messages.

When pressed while the online help is

displayed, cancels the online help.

•Used to select the emulation, font,

character code set; to read a memory

card, and more.

•When pressed during mode selection,

terminates the setting and the printer

returns to the Ready condition.

Finalizes numeric values and other

selections.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera FS6020 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info