Bedienungsanleitung Kyocera FS6020 (Seite 68 von 110) (Englisch)

20377

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

2-1

Chapter 2 Paper Selection

This chapter explains the following topics:

•General Guidelines

•Special Paper

•Paper Type

The printer is designed to print on high-quality copier bond

paper (the kind used in ordinary dry copier machines), but it

can also accept a variety of other types of paper within the

limits specified below.

The manufacturer assumes no liability for problems that occur

when paper not satisfying these requirements is used.

Selection of the right paper is important. Using the wrong

paper can result in paper jams, misfeeding, curling, poor

print quality, and paper waste, and in extreme cases can

damage the printer. The guidelines given below will increase

the productivity of your office by ensuring efficient, trouble-

free printing and reducing wear and tear on the printer.

Most types of paper are compatible with a variety of

machines. Paper intended for xerographic copiers can also be

used with the printer.

There are three general grades of paper: economy, standard,

and premium. The most significant difference between grades

is the ease with which they pass through the printer. This is

affected by the smoothness, size, and moisture content of the

paper, and the way in which the paper is cut. The higher the

grade of paper you use, the less risk there will be of paper

jams and other problems, and the higher the level of quality

your printed output will reflect.

Differences between paper from different suppliers can also

affect the printer’s performance. A high-quality printer

cannot produce high-quality results when the wrong paper is

used. Low-priced paper is not economical in the long run if it

causes printing problems.

Paper in each grade is available in a range of basis weights

(defined later). The traditional standard weights are 16, 20,

and 28 pounds (60 to 105 g/m

The following table summarizes the basic paper

specifications. Details are given on the following pages.

Laser printing is a process involving laser light, electrostatic

discharge, toner, and heat. In addition, as the paper passes

through the printer it undergoes considerable sliding,

bending, and twisting motions. A high-quality printing paper

matching the printer’s requirements withstands all these

stresses, enabling the printer to turn out clean, crisp printed

copies consistently.

Remember that all paper is not the same. Some of the factors

to consider when selecting paper for the printer are as

follows:

Condition of the Paper

Avoid using paper that is bent at the edges, curled, dirty,

torn, embossed, or contaminated with lint, clay, or paper

shreds.

Use of paper in these conditions can lead to illegible printing,

misfeeding, and paper jams, and can shorten the life of the

printer. In particular, avoid using paper with a surface

coating or other surface treatment. The paper should have as

smooth and even a surface as possible.

General Guidelines

NOTE

Paper Availability

Paper Specifications

Item Specification

Weight Cassette: 60 to 105 g/m

(16 to 28 lb/ream)

MP tray: 60 to 200 g/m

(16 to 53 lb/ream)

Thickness 0.086 to 0.110 mm (3.4 to 4.3

mils)

Dimensional accuracy ±0.7 mm (±0.0276 inches)

Squareness of corners 90° ±0.2°

Moisture content 4 to 6 %

Direction of grain Long grain

Pulp content 80 % or more

Selecting the Right Paper

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera FS6020 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info