20433
18
Zoom out
Zoom in
Vorherige Seite
1/143
Nächste Seite
Chapter 3 Using the Operator Panel
3-2
The following indicators light up during normal operation and
when the printer needs attention.
The message display gives information in the form of short mes-
sages. The eight messages listed below are displayed during
normal warm-up and printing.
Other messages that may appear when the printer needs the op-
erator’s attention are explained on page 4-4.
The interface Indicator shows the interface that is currently used.
It uses the following abbreviations:
PAR
Standard bi-directional parallel interface
SER Serial interface (RS-232C)
NET Network interface
OPT
Option network interface card
--- No interface is active.
Each interface has a timeout time of 30 seconds during which
the other interface should wait to receive a print job. Even if a
print job has been completed on the interface, you should wait
for this period until the other interface begins printing the job.
1.1 Operation Indicators
Indicator Description
Flashing: Indicates when an error occurs
that you can clear by yourself.
Lit: Indicates that the printer is on-line.
The printer prints received data.
Off: Indicates that the printer is off-line.
Data can be received but will not be printed.
Also indicates when printing is automatical-
ly stopped due to occurrence of an error.
Flashing: Indicates data transfer is taking
place.
Lit: Indicates either that data is being proc-
essed, or that data is being written to the
memory card.
Flashing: Indicates when the printer needs
maintenance attention or the printer is
warming up (Please wait).
Lit:
Indicates when a problem or an error
occurs that you can clear by yourself. (For
example, paper jam occurs.)
1Flashing: Indicates when no paper is de-
tected.
Fast-Flashing:
Indicates that a paper
jam is occurring.
Lit:
Indicates that the MP tray is select-
ed.
2Flashing:
Indicates when the cassette or
paper is not detected, or when the paper
is loading.
Fast-Flashing:
Indicates that a paper
jam is occurring.
Lit:
Indicates that the cassette is select-
ed.
3Flashing:
Indicates that there is paper
jam in the optional finisher.
Lit: Indicates that the document finisher
is being selected.
READY
DATA
ATTENTION
1
2
3
1.2 Message Display
Message Meaning
Self test The printer is self-testing after power-up.
Please wait The printer is warming up and is not
ready. When the printer is switched on for
the first time after the toner container is
installed, (Adding toner) also appears.
Ready The printer is ready to print.
Processing The printer is receiving data, generating
graphics, reading a memory card/hard
disk, or printing.
Sleeping The printer is in Sleep mode. The printer
wakes from Sleep mode whenever a key
on the operator panel is pressed, the cov-
er is opened or closed, or data is re-
ceived. The printer then warms up and
goes online. The time that the printer
takes to enter Sleep mode depends on
the Sleep Timer setting.
Cancelling data
Jobs inside the printer are being can-
celed. To cancel a job, see the table on
page 3-3.
Waiting The printer is waiting for the end-of-job
command before printing the last page.
Pressing the GO key allows you to obtain
the last page immediately.
FormFeed TimeOut
The printer is printing the last page after
a waiting period.
1.3 Interface Indicator
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kyocera FS9500DN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info