Bedienungsanleitung Kyocera FS9500DN (Seite 49 von 143) (Englisch)

20433

Zoom out

Zoom in

Vorherige Seite

1/143

Nächste Seite

Chapter 3 Using the Operator Panel

3-33

Repeat above steps until you have transferred all data

(files) that you want to write to the hard disk. Each time

you finish writing data, a hard disk write information

page is printed from the printer showing the information

explained in step 8 above, but pertaining only to the

data just written. To see all data contained in the hard

disk at once, print a list of data names as explained.

See Printing a List of Data Names on page 3-33.

Deleting Data

It is possible to use the printer to delete data from a hard disk one

by one. To delete data from a hard disk, proceed as follows.

Check that the hard disk contains data. Otherwise, the >Delete

Data menu will not appear on the message display.

Press the

key.

Press the 3 or 4 key repeatedly until Hard Disk >

appears.

Press the 2 key.

Press the 3 or 4 key repeatedly until >Delete Data

appears. The data name also appears.

Press the ENTER key. A blinking question mark (?) ap-

pears before the data name.

Press the 3 or 4 key to display the desired data name.

Press the ENTER key. Processing appears and the

data is deleted from the hard disk. The message dis-

play returns to Ready.

Printing a List of Data Names

The printer prints a list of all data names (referred to as parti-

tions) stored in a hard disk for reference. To print a list of data

names for the hard disk, proceed as follows.

Press the MENU key.

Press the 3 or 4 key repeatedly until Hard Disk >

appears.

Press the 2 key.

Press the 3 or 4 key repeatedly until >List of Par-

titions appears.

Press the ENTER key. A question mark (?) appears.

Press the

ENTER

key. Processing appears and the

printing of the list starts.

The printout (example above) includes the following

information;

Device Name/Number: HARD DISK/0 is indicated for

the hard disk.

Capacity: The total capacity of the hard disk in

bytes.

Used Space: The total size of the data stored in the

hard disk in bytes.

Free Space: The size of the capacity remaining in

the hard disk for storing further data,

including the amount of memory that

the printer uses for its system.

Partition Name: The name of the written data

assigned automatically by the printer.

Partition Size: The size of the written data in bytes.

Partition Type: The type of the written data i.e.,

whether it is host data (Data) or font

data (Font).

When the list of file names (partition list) for the hard

disk is printed, the message display returns to Ready.

It also prints out the Directory Status List to confirm the

directory or data that is written in PJL or KPDL

(PostScript).

Hard Disk >

>Delete Data

DataH001

>Delete Data

?DataH001

Hard Disk >

>List of

Partitions

>List of

Partitions ?

Partition Information

Device Information

PARTITION LIST

FS-9500DN Page Printer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera FS9500DN Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info