Bedienungsanleitung Kyocera FS9500DN (Seite 80 von 143) (Englisch)

20433

Zoom out

Zoom in

Vorherige Seite

1/143

Nächste Seite

5-1

Chapter 5 Paper Selection

This chapter explains the following topics:

• General Guidelines

• Special Paper

• Paper Type

The printer is designed to print on high-quality copier bond paper

(the kind used in ordinary dry copier machines), but it can also

accept a variety of other types of paper within the limits specified

below.

The manufacturer assumes no liability for problems that occur

when paper not satisfying these requirements is used.

Selection of the right paper is important. Using the wrong paper

can result in paper jams, misfeeding, curling, poor print quality,

and paper waste, and in extreme cases can damage the printer.

The guidelines given below will increase the productivity of your

office by ensuring efficient, trouble-free printing and reducing

wear and tear on the printer.

Most types of paper are compatible with a variety of machines.

Paper intended for xerographic copiers can also be used with

the printer.

There are three general grades of paper: economy, standard,

and premium. The most significant difference between grades is

the ease with which they pass through the printer. This is affect-

ed by the smoothness, size, and moisture content of the paper,

and the way in which the paper is cut. The higher the grade of

paper you use, the less risk there will be of paper jams and other

problems, and the higher the level of quality your printed output

will reflect.

Differences between paper from different suppliers can also af-

fect the printer’s performance. A high-quality printer cannot pro-

duce high-quality results when the wrong paper is used. Low-

priced paper is not economical in the long run if it causes printing

problems.

Paper in each grade is available in a range of basis weights (de-

fined later). The traditional standard weights are 16, 20, and 28

pounds (60 to 105 g/m

The following table summarizes the basic paper specifications.

Details are given on the following pages.

Laser printing is a process involving laser light, electrostatic dis-

charge, toner, and heat. In addition, as the paper passes through

the printer it undergoes considerable sliding, bending, and twist-

ing motions. A high-quality printing paper matching the printer’s

requirements withstands all these stresses, enabling the printer

to turn out clean, crisp printed copies consistently.

Remember that all paper is not the same. Some of the factors to

consider when selecting paper for the printer are as follows:

Condition of the Paper

Avoid using paper that is bent at the edges, curled, dirty, torn,

embossed, or contaminated with lint, clay, or paper shreds.

Use of paper in these conditions can lead to illegible printing,

misfeeding, and paper jams, and can shorten the life of the print-

er. In particular, avoid using paper with a surface coating or other

surface treatment. The paper should have as smooth and even

a surface as possible.

1. General Guidelines

NOTE

1.1 Paper Availability

1.2 Paper Specifications

Item Specification

Weight Cassette: 60 to 105 g/m

(16 to 28 lb/ream)

MP tray: 60 to 200 g/m

(16 to 53 lb/ream)

Thickness 0.086 to 0.110 mm (3.4 to 4.3 mils)

Dimensional accuracy ±0.7 mm (±0.0276 inches)

Squareness of corners 90° ±0.2°

Moisture content 4 to 6 %

Direction of grain Long grain

Pulp content 80 % or more

1.3 Selecting the Right Paper

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera FS9500DN Seite 80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info