Bedienungsanleitung Kyocera FS9520DN (Seite 9 von 115) (Englisch)

20438

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

viii

Installation Precautions

■ Environment

CAUTION

•Avoid placing the printer on or in locations which

are unstable or not level. Such locations may cause

the printer to fall down or fall over. This type of sit-

uation presents a danger of personal injury or dam-

age to the printer. ......................................................

•Avoid locations with humidity or dust and dirt. If

dust or dirt becomes attached to the power plug,

clean the plug to avoid the danger of fire or electri-

cal shock. ....................................................................

•Avoid locations near radiators, heaters, or other

heat sources, or locations near flammable items, to

avoid the danger of fire. .............................................

•To keep the printer cool and facilitate changing of

parts and maintenance, allow access space as

shown below. Leave adequate space, especially

around the left cover, to allow air to be properly ven-

tilated out of the printer. ...........................................

•Always use the caster stoppers to stabilize the

printer once it is in place to keep it from moving

and/or falling over and causing injury. .....................

Other Precautions

•Adverse environmental conditions may affect the

safe operation and performance of the printer. In-

stall in an air-conditioned room (recommended

room temperature: around 20 °C, humidity: around

65 % RH) and avoid the following locations when se-

lecting a site for the printer.

•Avoid locations near a window or with exposure to

direct sunlight.

•Avoid locations with vibrations.

•Avoid locations with drastic temperature fluctua-

tions.

•Avoid locations with direct exposure to hot or cold

air.

•Avoid poorly ventilated locations.

•When casters are installed on the printer, moving

the printer can cause damage to certain floor sur-

faces.

■ Power Supply/Grounding the Printer

WARNING

•Do not use a power supply with a voltage other than

that specified. Avoid multiple connections in the

same outlet. These types of situations present a

danger of fire or electrical shock. ..............................

•Plug the power cord securely into the outlet. If me-

tallic objects come in contact with the prongs on the

plug, it may cause a fire or electric shock. ...............

•Always connect the printer to an outlet with a

ground connection to avoid the danger of fire or

electrical shock in case of an electric short. If

ground connection is not possible, contact your ser-

vice representative. ...................................................

Other Precautions

•Connect the power plug to the closest outlet possible

to the printer.

■ Handling of Plastic Bags

WARNING

•Keep the plastic bags that are used with the printer

away from children. The plastic may cling to their

nose and mouth causing suffocation. .......................

Front:

100 cm (39-

/8")

Rear:

10 cm (3-

16")

Left:

60 cm (23-

8")

Right:

70 cm

(27-

16")

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera FS9520DN Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kyocera FS9520DN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info