Bedienungsanleitung Kyocera KM1500 (Seite 20 von 92) (Englisch)

17442

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Section 2 NAMES OF PARTS

2-4

(1) Start key & indicator

(Press this key when you want to start copying. Copying will

begin immediately if you press this key when the indicator is

lit green.)

(2) Reset/Power key

(Press this key when you want to cancel the currently entered

setting(s) and return to those registered for the initial mode.

Press down on this key for at least 3 seconds when you want to

engage the Off mode. When you want to release the copier

from the Off mode, press any one of the keys on the operation

panel. See page 2-5 for details on the initial mode and

page 4-7 for details on the Off mode.)

(3) Stop/Clear key

(Press this key when you want to stop copying. Press down on

this key for at least 3 seconds when you want to view the total

copy count. See page 6-11.)

(4) Copy quantity/magnification display

(Displays the number of copies to be made or the currently

selected magnification ratio. When the “%” symbol is lit, the

displayed number is the currently selected magnification

ratio.)

(5) Exposure adjustment keys

(Press the left key when you want to make the copy exposure

lighter and the right key to make the exposure darker. Press

down on both keys at the same time for at least 3 seconds

when you want to access the default settings mode.)

(6) Image quality select key

(Press this key when you want to select the desired image

quality mode. See page 4-1.)

(7) Number of Copies / Zoom(+) key

(Press this key when you want to raise the number of copies to

be made, as well as to increase the currently selected copy

magnification ratio. Press this key as well during default

settings in order to select the desired default item or setting.)

(8) Number of Copies / Zoom(-) key

(Press this key when you want to lower the number of copies

to be made, as well as to decrease the currently selected copy

magnification ratio. Press this key as well during default

settings in order to select the desired default item or setting.)

(9) Recall%/Enter key

(Press this key when you want copy in the Zoom mode. Press

this key as well during default settings in order to select the

current default item or register the currently displayed

setting. See page 4-4.)

(10) Reduce/Enlarge key

(Press this key when you want to use the Preset Zoom mode.

See page 4-5.)

(11) Paper Select key

(Press this key when you want to switch paper feed between

the drawer(s) and the multi-bypass tray. The indicator for the

currently selected source of paper feed will be lit green. Press

down on this key for at least 3 seconds when you want to

access the default items for paper size selection. See page 4-1.)

(12) Thick Paper key & indicator

(Press this key when you want to copy onto thick paper. Make

sure that the Thick Paper indicator is lit green. See page 3-9.)

(13) 2in1/4in1 key & indicator

(Press this key when you want to copy with the Layout modes.

Make sure that the 2in1 or the 4in1 indicator, as appropriate,

is lit green. Press down on this key for at least 3 seconds when

you want to access the default items for the Layout modes. See

page 5-1 for more information on the Layout modes.)

Operation panel

(1)

(2)

(3)

(14)

(15)

(10)(7)(9)(8)(11)(5)(6)

(13)

(16)

(4)(17)(12)

(24)

(23)

(19)

(21)

(22)

(18)

(20)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera KM1500 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info