495637
78
Zoom out
Zoom in
Vorherige Seite
1/150
Nächste Seite
System Setting
5-6 OPERATION GUIDE
38.Hagaki/A6RDet Select the paper size when copying an original
document of non-standard size.
Hagaki
A6 R*
5-18
39.B4R/Folio Det Select the paper size when copying an original
document of non-standard size.
B4 R
Folio R*
5-18
40.11x15" Detect When the size of original document is 11 x 15", the
original document is automatically zoomed.
On
Off*
5-18
41.Copy Limit Limits the number of copies or sets of copies that can
be made at one time.
1 to 999 (*999) 5-19
42.Duplex 2nd Rotates the paper 180 degrees and copies it when
both sides of a sheet are to be copied.
This will not be displayed when the optional Duplex
Unit is not installed.
Rotation On
Rotation Off*
4-5
43.Stitch Width Sets the initial value for the Binding Margin. [Inch specifications]
0.13/0.25/0.38/0.50/
0.63/0.75 (") (*0.25)
[Metric specifications]
1 to 18 (mm) (*6)
4-9
44.Border Erase Sets the initial value for the border width that will be
lightened to remove shadows from the sheet or book.
[Inch specifications]
0.13/0.25/0.38/0.50/
0.63/0.75 (") (*0.25)
[Metric specifications]
1 to 18 (mm) (*6)
4-11
45.4 in 1 Layout Sets the layout for the order in which the originals will
appear in the 4-in-1 Layout mode.
Portrait 1*
Portrait 2
Landscape 1
Landscape 2
4-17
46.Combine Border Selects the type of borderline to be used in the
Layout mode.
Off*
Solid
Dotted
4-17
47.Rotate/Offset Sets the copier so that each copy set is rotated and
collated when it is collate copied.
On: Rotational Collating
Enabled
Off: Rotational Collating
Disabled*
5-19
48.Auto Rotation Sets of copied documents are output landscape/
portrait alternately, allowing easy separation of each
set from the other.
On: Enabled*
Off: Disabled
5-20
49.Silent mode Shortens the amount of time the internal motor
continues to run after the copy is produced. Use this
setting in cases when the motor noise is bothersome.
0, 5, 10, 15, 30
(seconds) (*10)
5-20
50.Auto Clear Sets the copier so that automatic clearing is executed
after a set amount of time has elapsed after the copy
is produced. (Refer to Auto Clear function on page 1-
6.)
On: Enabled*
Off: Disabled
5-20
System Menu
Items
Description Available settings
Reference
Page
78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kyocera KM1635 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info