Bedienungsanleitung Kyocera KM1650 (Seite 15 von 136) (Englisch)

17452

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

xiii

Do not damage, break or attempt to repair the power cord. Do not place heavy

objects on the cord, pull it, bend it unnecessarily or cause any other type of damage.

These types of situations present a danger of fire or electrical shock.

Never attempt to repair or disassemble the machine or its parts as there is a danger

of fire, electrical shock or damage to the laser. If the laser beam escapes, there is a

danger of it causing blindness.

If the machine becomes excessively hot, smoke appears from the machine, there is

an odd smell, or any other abnormal situation occurs, there is a danger of fire or

electrical shock. Turn the main power switch off ({) immediately, be absolutely

certain to remove the power plug from the outlet and then contact your service

representative.

If anything harmful (paper clips, water, other fluids, etc.) falls into the machine, turn

the main power switch off ({) immediately. Next, be absolutely certain to remove the

power plug from the outlet to avoid the danger of fire or electrical shock. Then contact

your service representative.

Do not remove or connect the power plug with wet hands, as there is a danger of

electrical shock.

Always contact your service representative for maintenance or repair of internal parts.

Caution

Do not pull the power cord when removing it from the outlet. If the power cord is

pulled, the wires may become broken and there is a danger of fire or electrical shock.

(always grasp the power plug when removing the power cord from the outlet.)

Always remove the power plug from the outlet when moving the machine. If the

power cord is damaged, there is a danger of fire or electrical shock.

If the machine will not be used for a short period of time (overnight, etc.), turn the

main power switch off ({). If it will not be used for an extended period of time

(vacations, etc.), remove the power plug from the outlet for safety purposes during

the time the machine is not in use.

Always hold the designated parts only when lifting or moving the machine.

For safety purposes, always remove the power plug from the outlet when performing

cleaning operations.

If dust accumulates within the machine, there is a danger of fire or other trouble. It is

therefore recommended that you consult with your service representative in regard to

cleaning of internal parts. This is particularly effective if accomplished prior to

seasons of high humidity. Consult with your service representative in regard to the

cost of cleaning the internal parts of the machine.

Other precautions

Do not place heavy objects on the machine or cause other damage to the machine.

Do not open the upper front cover, turn off the main power switch, or pull out the power plug

during copying.

When lifting or moving the machine, contact your service representative.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera KM1650 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kyocera KM1650

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info