Bedienungsanleitung Kyocera KM2020 (Seite 10 von 124) (Englisch)

17456

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

1-2

INSTALLATION PRECAUTIONS

Environment

CAUTION

Avoid placing the copier on or in locations

which are unstable or not level. Such

locations may cause the copier to fall down or

fall over. This type of situation presents a

danger of personal injury or damage to the

copier. ..............................................................

Avoid locations with humidity or dust and

dirt. If dust or dirt become attached to the

power plug, clean the plug to avoid the

danger of fire or electrical shock. ...................

Avoid locations near radiators, heaters, or

other heat sources, or locations near

flammable items, to avoid the danger of fire.

To keep the copier cool and facilitate

changing of parts and maintenance, allow

access space as shown below. Leave adequate

space, especially around the left and right

sides, to allow air to be properly ventilated

out of the copier...............................................

* Additional space will be required when the Document

Processor is to be installed.

Other precautions

Adverse environmental conditions may affect the safe

operation and performance of the copier. Install in an

air-conditioned room (recommended room

temperature: around 73.4ºF (23ºC), humidity: around

50%) and avoid the following locations when selecting

a site for the copier.

• Avoid locations near a window or with exposure to direct

sunlight.

• Avoid locations with vibrations.

• Avoid locations with drastic temperature fluctuations.

• Avoid locations with direct exposure to hot or cold air.

• Avoid poorly ventilated locations.

If the floor is delicate, when this product is moved

after installation, the floor material may be damaged.

During copying, some ozone is released, but the

amount will not cause any ill effect to one's health. If,

however, the copier is used over a long period of time

in a poorly ventilated room or when making an

extremely large number of copies, the smell may

become unpleasant. To maintain the appropriate

environment for copy work, it is suggested that the

room be properly ventilated.

Power supply/Grounding the copier

WARNING

DO NOT use a power supply with a voltage

other than that specified. Avoid multiple

connections in the same outlet. These types

of situations present a danger of fire or

electrical shock. ..............................................

Plug the power cord securely into the outlet.

If metallic objects come in contact with the

prongs on the plug, it may cause a fire or

electric shock. .................................................

Always connect the copier to an outlet with a

ground connection to avoid the danger of fire

or electrical shock in case of an electric short.

If an earth connection is not possible, contact

your service representative............................

Other precautions

Connect the power plug to the outlet closest to the

copier.

The power supply cord is used as the main disconnect

device. Ensure that the socket/outlet is

located/installed near the equipment and is easily

accessible.

Handling of plastic bags

WARNING

Keep the plastic bags that are used with the

copier away from children. The plastic may

cling to their nose and mouth causing

suffocation.......................................................

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera KM2020 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info