Bedienungsanleitung Kyocera KM2020 (Seite 20 von 124) (Englisch)

17456

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Section 2 NAMES OF PARTS

2-4

Metric specifications

(24) Toner Disposal Indicator

This will be lit red when the Waste Toner Box is full.

(25) Add Toner Indicator

This will blink red when only a little toner is left. It will stay

lit when no further copies can be produced.

(26) Memory Overflow Indicator

This will be lit red when the amount of available memory is

exceeded during memory copy mode.

(27) Maintenance Indicator

This will flash red when the time for a maintenance inspection

draws near. In addition, it will be lit red when it is time for a

maintenance inspection.

(28) [Auto Selection] Key

Press this when making copies of originals of different sizes.

The Mixed Original Sizes Indicator will light up. This can be

used when the optional Document Processor is installed.

(Refer to P.7-3.)

(29) Combine/Merge Copy Key

Press this when Combine/Merge copies (2 in 1 or 4 in 1) are to

be made. (Refer to P.5-10.) Pressing this for 3 seconds will

display the Default Setting Mode’s Combine/Merge Copy item.

(Refer to P.5-13.)

(30) 2-Sided Copy Key

Press this to match the original type when making copies of

both sides. (Refer to P.5-1.) Pressing this for 3 seconds will

display the Default Setting Mode’s 2-Sided Copy item. (Refer

to P.5-3.)

(31) Split Copy Key

Press this to match the original type when making split

copies. (Refer to P.5-4.)

(32) [Sort] Key

Press this when copies are to be sorted. (Refer to P.5-15.)

(33) Border Erase Key

Press this to match the original type when making copies in

which the borders are to be lightened. (Refer to P.5-8.)

Pressing this for 3 seconds will display the Default Setting

Mode’s Border Width item. (Refer to P.5-8.)

(34) [Margin] Key

Press this to shift the image to create a margin. (Refer to

P.5-6.) Pressing this for 3 seconds will display the Default

Setting Mode’s Margin Width item. (Refer to P.5-6.)

(35) Paper Type Selection Key

Select the paper type when thick or thin paper, etc. are to be

copied.

Regarding the Default Setting Mode (the mode after

warm-up processing has been completed or the

[Reset] key pressed)

The copier has been set at the factory to automatically select a

magnification ratio of 1:1 for the same size of paper as the original

in the [Auto Paper Select] Mode with the No. of Copies at “1” and

[Text & Photos Mode] for the Image Quality.

Notes

• The Default Setting Mode can be changed in the

Default Settings.

• In the case where an optional drawer is present, the

drawer selected in the Default Setting Mode can be

changed. (Refer to P.6-20 "Selected Drawer ".)

• The Image Quality Mode selected in the Default

Setting Mode can be changed. (Refer to P.6-12

"Original Image Quality ".)

• The Default Setting for the copy Exposure Adjustment

can be changed to the [Auto Exposure Mode]. (Refer to

P.6-13 "Exposure Mode ".)

Regarding the Auto-clear function

After the copy has been produced and a fixed interval (10 - 270

seconds) has elapsed, the copier will automatically revert to the

state it was in when warm-up processing was completed.(However,

the copy Exposure Mode and the Image Quality will not revert back

to their original state. Copies can still be repeatedly produced with

the same Copy Mode, No. of Copies, copy Exposure and other

settings if the Auto-clear function has not been activated.

Note

Please refer to P.6-30 "Auto Clear Time " Turning OFF

the Auto-clear Function P.6-29 "Auto Clear Setting "

for information on changing the time interval before the

Auto-clear function activates.

Custom Sizes

Paper and original sizes that are not displayed on the Operation

Panel can be registered as Custom Sizes. (Refer to P.3-6.)

(17)(24)

(34)

(1)

(2)

(3)

(15)(13)(14) (7) (6) (5)(18)

(27) (26) (25)

(21) (19)(20)(22) (23) (35) (31)(30)

(33)

(32) (29) (28) (12) (4)(8) (11) (10) (9)

(16)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera KM2020 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info