Bedienungsanleitung Kyocera KM2030 (Seite 8 von 74) (Englisch)

17458

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

■ Power supply/Grounding the copier

WARNING

• DO NOT use a power supply with a voltage other than

that specified. Avoid multiple connections in the same

outlet. These types of situations present a danger of

fire or electrical shock. ...............................................

• Plug the power cord securely into the outlet. If metallic

objects come in contact with the prongs on the plug, it

may cause a fire or electric shock. .............................

• Always connect the copier to an outlet with a ground

connection to avoid the danger of fire or electrical shock

in case of an electric short. If an earth connection is

not possible, contact your service representative. .....

Other precautions

• Connect the power plug to the closest outlet possible to

the copier.

■ Handling of plastic bags

WARNING

• Keep the plastic bags that are used with the copier away

from children. The plastic may cling to their nose and

mouth causing suffocation..........................................

INSTALLATION PRECAUTIONS

■ Environment

CAUTION

• Avoid placing the copier on or in locations which are

unstable or not level. Such locations may cause the

copier to fall down or fall over. This type of situation

presents a danger of personal injury or damage to the

copier. .........................................................................

• Avoid locations with humidity or dust and dirt. If dust or

dirt become attached to the power plug, clean the plug

to avoid the danger of fire or electrical shock. ............

• Avoid locations near radiators, heaters, or other heat

sources, or locations near flammable items, to avoid

the danger of fire. ........................................................

• To keep the copier cool and facilitate changing of

parts and maintenance, allow access space as shown

below.

Leave adequate space, especially around the left

cover, to allow air to be properly ventilated out of

the copier. .................................................................

• Always use the caster stoppers to stabilize the copier

once it is in place to keep it from moving and/or falling

over and causing injury...............................................

Other precautions

• Adverse environmental conditions may affect the safe

operation and performance of the copier. Install in an

air-conditioned room (recommended room temperature:

around 20°C, humidity: around 65%RH) and avoid the

following locations when selecting a site for the copier.

. Avoid locations near a window or with exposure to

direct sunlight.

. Avoid locations with vibrations.

. Avoid locations with drastic temperature fluctuations.

. Avoid locations with direct exposure to hot or cold air.

. Avoid poorly ventilated locations.

1-2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera KM2030 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info