Bedienungsanleitung Kyocera KM2030 (Seite 12 von 74) (Englisch)

17458

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

CHAPTER 2 NAMES OF PARTS

2-3

2. Operation panel

1 Start key (Indicator)

(When the indicator is lit green, press to start copying.)

2 Clear All key (See the “● Initial mode” on page 2-4.)

3 Interrupt key (Indicator)

(Press to interrupt copying. The Indicator will light when the

key is pressed. See page 4-6.)

4 Energy Saver (preheat) key (Indicator)

(Press to select the energy saver mode. The indicator is lit

while the energy saver mode is ON. See page 4-7.)

5 Stop/Clear key

(Press to stop copying or to change the number of copies

to be made. Press to return to the previous setting screen,

such as the copy function setting, too.)

6 Numeric keys

(Press to set the number of copies and enter other values.)

7 Message display

(Displays messages on how to operate the copier as well

as trouble. Display contrast can be adjusted.

See “! DISPLAY CONTRAST ADJUST.” on page 6-18.)

8 Enter key

(Press to confirm selected functions and selected items on

the message display.)

9 Paper Select/Cursor up key

(Paper size can be selected by simply changing the paper

feed drawer. The paper size selected at present is indi-

cated on the message display. Also used to move the

cursor in the message display upward.)

0 Original/Cursor down key

(Press to select the original size. Also used to move the

cursor in the message display downward.)

! Manual/Cursor right key

(Press to make copies at the same ratio, regardless of the

original size. Also used to move the cursor in the message

display to the right.)

@ Cursor left key

(Press to move the cursor in the message display to the

left.)

# Machine Error indicator

(Lights when a machine problem occurs, such as a paper

misfeed.)

$ Data indicator

(Lights/blinks when using the optional printer function.)

% Zoom (+) key

(Press to increase magnification ratio in zoom copying.)

^ Zoom (–) key

(Press to decrease magnification ratio in zoom copying.)

& Preset R/E key

(Press to change the magnification ratio.)

* On-line/Printer key (Indicator)

(Press to switch to the printer mode when the optional

printer board has been installed. The On-line/Printer

indicator will light while the copier is in the online mode.)

( Layout key (Indicator)

(Press to copy multiple images onto the same face of the

copy. The indicator is lit in the layout copy mode.

See page 5-7.)

) Copy exposure adjustment keys/Copy exposure indicators

(Press to adjust copy exposure. The indicator will show the

present copy exposure.)

⁄ Scanner key (Indicator)

(Press to switch to the scanner mode when the optional

network scanner has been installed. The indicator will light

while the copier is in the scanner mode.)

¤ Duplex/Split Page key (Indicator)

(Press to perform duplex or page separation copying. The

indicator will light. The optional duplex unit must be

installed to use these functions. See pages 5-1 and 4.)

‹

/Language key

(Press to set copy management, default settings and

language selection.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera KM2030 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info