Bedienungsanleitung Kyocera KM2530 (Seite 137 von 146) (Englisch)

17462

137

Zoom out

Zoom in

Vorherige Seite

1/146

Nächste Seite

CHAPTER 9 CLEANING AND SPECIFICATIONS

9-5

Duplex Document Processor

The Duplex Document Processor automatically feeds one-sided originals one by one for scanning. It also reverses two-sided originals

automatically for duplex copying and page separation copying.

Document Processor

This document feeder automatically feeds and scans each original, one by one, for copying.

Paper Feeder

Two Paper Feeders of the same type as drawer in the main body can be added.

Capacity and the paper loading method is the same as those for the standard drawer in the main unit.

Paper Feeder

The Paper Feeder holds up to 3,000 sheets of 11" ✕ 8 1/2"/A4 size standard paper.

Pull the Paper Feeder out towards you as far as it will go, and then load up to 1,500 sheets of paper in each rows.

Document Finisher

This unit lets you store a large volume of copies and shifts the position of each copy set for ease of sorting. It can staple finished copy sets

and bind them. It is also possible to use the Document Finisher to punch holes in them for filling purposes (optional).

Document Finisher

The Document Finisher stores a large quantity copies, and sorts multiple sets by shifting the position that each one is ejected. It is also

possible to use the Document Finisher to staple the copy sets or punch holes in them for filling purposes.

Built-in Finisher

The finisher stores a large quantity of copies. It can also sorts multiple copies into sets by shifting the eject position. Paginated copies can

be stapled, too.

Duplex unit

If the Duplex unit is installed, duplex copies can be made. Duplex copies can be made with A3 to A5R [11" ✕ 17" to 5 1/2" ✕ 8 1/2"]

(75 to 80 g/m

) paper.

Job separator

When using the optional printer function, the paper eject point can be changed according to the used function, making it easier to sort

paper. Copied paper can be ejected to the job separator (upper section). See “Select copy output mode” in Machine default setting on

page 6-18.

Key counter

The key counter determines the number of copies that have been made. It is useful for copier centralized management on a department

or even company level.

Printer board

If the printer board is installed, this copier can be used as a printer.

Since the network board is equipped, this copier can also be used as a network printer, allowing access from multiple computers.

Printer/scanner kit

If the printer/scanner kit is installed, this copier can be used as a printer or a network scanner.

Since the network board is equipped, this copier can also be used as a network printer, allowing access from multiple computers.

Fax kit

If the fax kit is installed, this copier can be used as a fax. Also if the fax kit is used together with the optional printer/scanner kit, this copier

can be used as a network fax, allowing transmission and reception by a computer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera KM2530 Seite 137

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kyocera KM2530

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info