Bedienungsanleitung Kyocera KM5530 (Seite 222 von 250) (Englisch)

17480

222

Zoom out

Zoom in

Vorherige Seite

1/250

Nächste Seite

Section 9 TROUBLESHOOTING

9-4

Message

“Paper capacity exceeded. Remove

paper from Finisher.”

“Remove paper from inner tray of

Finisher.”

“Remove paper from Finisher.”

Check paper in Finisher. Incomplete

copies inside.

“Cannot sort this size.” [“Cannot sort

this paper size.”]

“Cannot staple. _____:maximum

capacity (Staple)”

[“Cannot staple. _____ :Max.

staples”]

“Cannot staple this paper type.”

“Cannot punch this size.”

[“Cannot punch this paper size.”]

“Cannot punch this paper type.”

“Staple jam. Remove staples.”

[“Staple jam. Remove staple(s).”]

“Check the waste punch box.”

[“Check Punch Hole box.”]

“Out of staples. Add staples.”

[“Stapler empty. Add staples.”]

“Cannot staple this size.”

[“Cannot staple this paper size.”]

“Tandem Copy is cancelled. Unable

to Tandem Copy under current

setting.” [“Cancel tandem copy.

Cannot tandem copy with the

present setting.”]

“The waste toner box almost full.”

[“The waste toner container is

almost full.”]

“The waste toner box is full.”

[“The waste toner container is full.”]

Procedure

The number of copies stored in the optional Document Finisher has exceeded the

acceptable limit. Remove the copies from the Document Finisher.

There are still copies left in the optional Document Finisher. Remove all of the copies

from the Document Finisher.

There are still copies left on the tray(s) of the optional Document Finisher or inside the

Document Finisher itself. Remove all of the copies from the Document Finisher.

There are unfinished copies among those that have been ejected into the optional

Document Finisher.

The selected paper size cannot be used in the sort/finished mode. For more detailed

information, refer to the Operation Guide for your Document Finisher.

The number of copies stapled in the optional Document Finisher has exceeded the

acceptable limit. For more detailed information, refer to the Operation Guide for your

Document Finisher.

The selected paper type cannot be stapled. Select a different type of paper.

The selected paper size cannot be hole punched. For more detailed information, refer to

the Operation Guide for your Document Finisher.

The selected paper size cannot be hole punched. Select a different type of paper.

Staples have jammed in the optional Document Finisher. Refer to the Operation Guide

for your Document Finisher and remove the jammed staples.

The hole punch chad box in the optional Document Finisher is full. Refer to the

Operation Guide for your Document Finisher and dispose of the hole punch chad.

There are no staples left in the optional Document Finisher. Refer to the Operation Guide

for your Document Finisher and load staples.

Stapling of small size paper, such as 5 1/2" x 8 1/2" and A5R, is not possible. For more

detailed information, refer to the Operation Guide for your Document Finisher.

Tandem copying (option) is not possible. Touch the “Check” key and check the copy

settings.

It is almost time to replace the waste toner box. Contact your service representative or

an authorized service center.

It is time to replace the waste toner box. Contact your service representative or an

authorized service center.

Reference

page

—

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera KM5530 Seite 222

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info