Bedienungsanleitung Kyocera KM6030 (Seite 17 von 124) (Englisch)

17482

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Do not damage, break or attempt to repair the power cord. Do not place heavy

objects on the cord, pull it, bend it unnecessarily or cause any other type of damage.

These types of situations present a danger of fire or electrical shock.

Never attempt to repair or disassemble the copier or its parts as there is a danger of

fire, electrical shock or damage to the laser. If the laser beam escapes, there is a

danger of it causing blindness.

If the copier becomes excessively hot, smoke appears from the copier, there is an

odd smell, or any other abnormal situation occurs, there is a danger of fire or

electrical shock. Turn the main power switch off ({ position) immediately, be

absolutely certain to remove the power plug from the outlet and then contact your

service representative.

If anything harmful (paper clips, water, other fluids, etc.) falls into the copier, turn the

main power switch off ({ position) immediately. Next, be absolutely certain to remove

the power plug from the outlet to avoid the danger of fire or electrical shock. Then

contact your service representative.

Do not remove or connect the power plug with wet hands, as there is a danger of

electrical shock.

Always contact your service representative for maintenance or repair of internal parts.

Caution

Do not pull the power cord when removing it from the outlet. If the power cord is

pulled, the wires may become broken and there is a danger of fire or electrical shock.

(Always grasp the power plug when removing the power cord from the outlet.)

Always remove the power plug from the outlet when moving the copier. If the power

cord is damaged, there is a danger of fire or electrical shock.

If the copier will not be used for a short period of time (overnight, etc.), turn the main

switch off ({). If it will not be used for an extended period of time (vacations, etc.),

remove the power plug from the outlet for safety purposes during the time the copier

is not in use.

Always hold the designated parts only when lifting or moving the copier.

For safety purposes, always remove the power plug from the outlet when performing

cleaning operations.

If dust accumulates within the copier, there is a danger of fire or other trouble. It is

therefore recommended that you consult with your service representative in regard to

cleaning of internal parts. This is particularly effective if accomplished prior to

seasons of high humidity. Consult with your service representative in regard to the

cost of cleaning the internal parts of the copier.

Do not leave the document processor open as there is a danger of personal injury.

Other precautions

Do not place heavy objects on the copier or cause other damage to the copier.

Do not open the front cover, turn off the main power switch, or pull out the power plug during

copying.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera KM6030 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kyocera KM6030

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info