Bedienungsanleitung Kyocera KM6230 (Seite 17 von 167) (Englisch)

17490

Zoom out

Zoom in

Vorherige Seite

1/167

Nächste Seite

Section 2 NAMES OF PARTS

2A080030A

KM-6230 (KME)

/ 131

(3) Basic screen on the touch panel

1 “BASIC” key

(Touch this key when you want to return to the basic screen.)

2 “ZOOM” key

(Touch this key when you want to change the copy magnification

ratio. See page 4-3.)

3 “FUNCTION” key

(Touch this key when you want to select the copy function. The func-

tion select screen will appear.)

4 “SPECIAL” [Management mode] key

(Touch this key when you want to change the language used on the

touch panel or to set the weekly timer, etc. The management mode

select screen will appear.)

5 Message display

(Displays messages on how to operate the machine and shows indi-

cations of the machine’s status.)

6 Copy number display

(Displays, at the start and end of copying, the number of copies that

were set. During copying, it displays the number of copies that have

been finished to that point and, above that, the number of copies that

were set.)

7 Copy magnification ratio display

(Displays the selected copy magnification ratio.)

8 Copy quality mode selection keys

(Touch either the “MIXED” (text and photos), “TEXT” or “PHOTO”

keys to select the mode that corresponds to the content of the origi-

nals being used. The highlighted key indicates the currently selected

mode. See page 4-2.)

9 Copy exposure scale

(Appears in the manual exposure mode. Move the scroll box within

the exposure scale to the right to make darker copies, and move it to

left to make lighter copies. The total number of exposure steps can

be set to either 7 or 13. See “2 Exposure steps” on page 8-15.)

0 Copy exposure adjustment keys

(Touch the appropriate key when you want to manually adjust the

copy exposure. Touch the “LIGHTER” key to lighten the exposure

and the “DARKER” key to darken it. )

! “AUTO” [Auto/manual exposure mode selection] key

(Touch this key when you want to switch between the auto exposure

mode and manual exposure mode. When the key is highlighted, the

auto exposure mode is selected. When the manual exposure mode

is selected, the copy exposure scale will be displayed.)

@ “ECO” key

(Touch this key to highlight it when you want to enter the toner

economy mode where the exposure level will be lowered and toner

consumption reduced. Use this mode as well for test printing and the

like when high quality printing is not a requirement. In order to select

whether you want this key to be displayed or not, see “3 Toner

economy mode” on page 8-15.)

# Stack bypass key

(Touch this key when you want to copy onto paper that is set in the

stack bypass tray.)

$ Paper size keys

(Display the size of paper that is set in each of the drawers. When

you want to select the drawer from which paper will be fed, touch the

appropriate key to highlight that key.)

% “DUPLEX” key

(Touch this key when you want to make settings for two-sided copy-

ing. The two-sided copy set-up screen will appear. See page 4-6.)

^ Paper size key

(This key will only be displayed when the copier is equipped with the

optional Side Deck.)

& Copy time display

(Displays the amount of time that elapsed from the start to finish of

each copy job.)

2-4

E_Sec2_Name.PM6 10/13/00, 13:365

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera KM6230 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info