Bedienungsanleitung Kyocera KM6230 (Seite 29 von 167) (Englisch)

17490

Zoom out

Zoom in

Vorherige Seite

1/167

Nächste Seite

Section 4 BASIC OPERATION

4-3

6. Selecting the copy quality

Touch the “TEXT”, “PHOTO”, or “MIXED” key, as desired, until that

key is highlighted.

TEXT: For originals that consist primarily of text

PHOTO: For originals that consist primarily of photos and other half-

tone images

MIXED: For originals with both text and photos

* It is possible to select the default copy quality mode.

(See “6 Copy quality mode” on page 8-16.)

■ Various functions

• Enlargement/reduction

• Two-sided copying from various originals

• Interrupt copying

• Making a margin space for binding, etc.

• Printing page numbers on the copies

• Copying each side of two-page [open-face] originals onto

separate sheets

• Erasing the edges around copies from books, etc.

• Adding covers for or insert sheets between copies

• Making copies onto transparencies

• Feeding paper as a backing sheet for transparencies

• Overlaying images

• Copying the images from either two or four originals onto a

single copy sheet

• Making a booklet (sheet originals)

• Making a booklet (two-page [open-face] originals)

• Copying and binding into a booklet (sheet originals)

• Inverting black and white

• Making mirror-image copies

• Automated sorting

• Memorizing frequent used settings

9. End of copying

Finished copies will be ejected onto the installed option (the Copy

Tray, Finisher or Booklet Stitcher).

* Depending upon the copy mode, the copies may be ejected face

up or face down.

* If the copier is equipped with the optional Copy Tray, a maximum of

250 copies can be stored at one time.

3. Selecting the desired functions

Select from among the copier’s various functions.

* Touch the “▼” key or the “▲” key to access all of the available

functions.

* It is possible to select the functions that will be displayed on the

screen that appears when you touch the “FUNCTION” key. (See

“) Customize function display screen (#1 - #5)” on page 8-16.)

When the “AUTO” key is highlighted on the touch panel, the auto

exposure mode is selected. In the auto exposure mode, the

exposure of original will be detected and the optimum exposure

automatically selected. It is also possible to increase the contrast

and thereby have the copier erase the background color of the

originals in order to make clearer copies.

* If copies are consistently too dark or too light, the overall exposure

level can be adjusted as well. (See “4 Auto exposure adjustment”

on page 8-15.)

* It is possible to change the exposure mode in the initial mode from

“MANUAL” to “AUTO”. (See “1 Exposure mode” on page 8-15.)

CAUTION

If the copier will not be used for a short period of time (over-

night, etc.), turn the main switch OFF (O). If it will not be

used for an extended period of time (vacations, etc.), re-

move the power plug from the outlet for safety purposes

during the time the copier is not in use.

-2

2A080030A

KM-6230 (KME)

/ 131

4-2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera KM6230 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info