Bedienungsanleitung Kyocera KM6330 (Seite 224 von 260) (Englisch)

17494

224

Zoom out

Zoom in

Vorherige Seite

1/260

Nächste Seite

Section 8 OPTIONAL EQUIPMENT

8-8

(6) Tandem Copier Kit

The Tandem Copier Kit is required when two copy machines are

connected together. By connecting two copy machines together, you

can make a large volume of copies using both machines at the same

time (tandem copying) or, if you also use the optional printer functions

of this copier, you can print to both machines at the same time

(tandem printing), thereby reducing the job time by half.

1 Features of the Tandem Copier Kit

• Jobs scanned at the copier or sent from a computer are divided

equally between the two machines.

• If, for any reason, whether it be mechanical trouble or when tandem

copying is terminated in one copier due to another job, any

remaining copying or printing that is required will be accomplished

automatically by whichever machine completes its current job first

(output recovery function). This will help you to increase your overall

copying and printing efficiency.

• It is possible to perform interrupt copying on the sub [slave] machine,

even during tandem copying, enabling you to make copies in a hurry

without having to have that job wait in a queue.

2 Operating requirements of the Tandem Copier Kit

• Copying is only possible in the sort mode.

• All jobs (number of copies/prints) will be divided equally between the

two machines.

• It is not possible to have copying start while the remaining originals

are still being scanned. Copying will only begin after all originals are

scanned.

• Interrupt copying is not possible during scanning for tandem copying

or tandem printing, or during transmission of print data from a

computer. (The operation panel is not available for use during this

time as well.)

• From the moment copying is initiated after scanning, interrupt

copying is only possible at the sub [slave] machine. (Interrupt

copying is not possible at the main [master] machine until after

copying is complete.)

• Tandem copying is not available if the internal memory or Hard Disk

are not usable for any reason.

• The following modes and operations are not available under tandem

copying.

1 Proof mode

2 Transparency+backing sheet mode

3 Form overlay mode

4 Auto selection/Filing mode (filing)

5 Feeding non-standard-size paper from the multi-bypass tray

6 Manual feeding of envelopes from the multi-bypass tray

7 Batch scanning mode

8 Job build mode

9 Document management functions (printing out documents)

10 Selecting tandem operation with job reservation

11 Initiating tandem copying with the [Interrupt] key

* The modes and operations listed as 1 through 7 above can be

selected during tandem copying, but the tandem copying mode will

be canceled.

* The modes and operations listed as 8 through 11 above will not be

available while the tandem copy mode is engaged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera KM6330 Seite 224

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kyocera KM6330

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info