Bedienungsanleitung Kyocera KM7530 (Seite 16 von 264) (Englisch)

17498

Zoom out

Zoom in

Vorherige Seite

1/264

Nächste Seite

Section 2 NAMES OF PARTS

2-4

2. Operation panel

6 5 4

8 3

$%^&*0@ !

1 [Start] key & indicator lamp

(Press this key when the lamp in that key is lit green and you want

to start copying.)

2 [Stop/Clear] key

(Press this key when you want to stop copying or change the

number of copies to be made.)

3 [Reset] key

(Press this key to reset all functions to their initial mode settings.

See “Initial mode” on page 2-5.)

4 [Energy Saver] key & indicator lamp

(Press this key when you want to turn the energy-saving preheat

mode ON. Press the same key again to turn the preheat mode

OFF. See page 4-11.)

5 [Interrupt] key & indicator lamp

(Press this key to light the lamp in that key when you want to

perform interrupt copying. See page 4-9.)

6 [Management] key

(When copy management is turned ON, press this key after

copying in order to return to the department ID-code entry display.

See page 7-1.)

7 [ ] (default setting) key

(Press this key when you want to perform default settings as well

as those related to copy management, etc.)

8 Keypad

(Use these keys when you want to set the number of copies to be

made or enter other values.)

9 Touch panel

(This panel displays such information as operation procedures,

machine status, and the various function keys.)

0 Brightness adjustment control dial

(Turn this dial when you want to adjust the brightness of the touch

panel.)

! [Copier] key & indicator lamp

(Press this key to light the lamp in that key when you want to use

the copier functions of this machine.)

@ [Printer] key & indicator lamp

(Press this key when you want to use the optional printer functions

of this machine. The lamp in that key will light when the machine is

in the printer operation mode. The indicator to the left of the key

will either light green or orange, or will flash, depending upon the

status of the machine. See page 9-6.)

# [Scanner] key & indicator lamp

(Press this key when you want to use the optional scanner

functions of this machine. The lamp in that key will light when the

machine is in the scanner operation mode. The indicator to the left

of the key will either light green or orange, or will flash, depending

upon the status of the machine. See page 9-6.)

$ [Auto Selection] key & indicator lamp

(Press this key to light the lamp in that key when you want to use

the auto selection mode. See page 5-30.)

% [Job Build] key & indicator lamp

(Press this key to light the lamp in that key when you want to use

the job build mode. See page 5-58.)

^ [Repeat Copy] key & indicator lamp

(Press this key to light the lamp in that key when you want to use

the repeat copy mode. See page 5-43.)

& [Job Queue] key & indicator lamp

(Press this key to light the lamp in that key when you want to use

the output management functions of the copier. See page 6-20.)

* [Document Management] key & indicator lamp

(Press this key to light the lamp in that key when you want to use

the document management functions of the copier.

See page 6-1.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera KM7530 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kyocera KM7530

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info