Bedienungsanleitung Kyocera TASKalfa 5551ci (Seite 555 von 569) (Englisch)

651300

555

Zoom out

Zoom in

Vorherige Seite

1/569

Nächste Seite

11-35

Appendix > Glossary

Glossary

Accessibility

The machine is designed featuring good accessibility even for the elderly and those who are physically challenged or

visually impaired. Touch panel characters can be enlarged while the touch panel is adjustable in two angles.

AppleTalk

AppleTalk, which comes with Apple Computer's Mac OS, is a network protocol. AppleTalk enables file/printer sharing

and also enables you to utilize application software that is on another computer on the same AppleTalk network.

Auto Form Feed Timeout

During data transmission, the machine may sometimes have to wait until receiving the next data. This is the auto form

feed timeout. When the preset timeout passes, the machine automatically prints output. However, no output is

performed if the last page has no data to be printed.

Auto-IP

Auto-IP is a module that enables dynamic IPv4 addresses to be assigned to a device on startup. However, DHCP

requires a DHCP server. Auto-IP is a server-less method of choosing an IP address. IP addresses between 169.254.0.0

to 169.254.255.255 are reserved for Auto-IP and assigned automatically.

Auto Paper Selection

A function to automatically select paper in the same size as originals when printing

Auto Sleep

A mode designed for electrical power saving, activated when the machine is left unused or there is no data transfer for a

specific period. In Sleep mode, power consumption is kept to a minimum.

Bonjour

Bonjour, also known as zero-configuration networking, is a service that automatically detects computers, devices and

services on an IP network. Bonjour, because an industry-standard IP protocol is used, allows devices to automatically

recognize each other without an IP address being specified or DNS server being set. Bonjour also sends and receives

network packets by UDP port 5353. If a firewall is enabled, the user must check that UDP port 5353 is left open so that

Bonjour will run correctly. Some firewalls are set up so as to reject only certain Bonjour packets. If Bonjour does not run

stably, check the firewall settings and ensure that Bonjour is registered on the exceptions list and that Bonjour packets

are accepted. If you install Bonjour on Windows XP Service Pack 2 or later, the Windows firewall will be set up correctly

for Bonjour.

Default Gateway

This indicates the device, such as a computer or router, that serves as the entrance/exit (gateway) for accessing

computers outside the network that you are on. When no specific gateway is designated for a destination IP address,

data is sent to the host designated as the Default Gateway.

DHCP (Dynamic Host Configuration Protocol)

Dynamic Host Configuration Protocol (DHCP) that automatically resolves IP addresses, subnet masks, and gateway

addresses on a TCP/IP network. DHCP minimizes the load of network management employing a large number of client

computers because it relieves individual clients including printers from the IP address being assigned.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kyocera TASKalfa 5551ci Seite 555

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kyocera TASKalfa 5551ci

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info