606451
21
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
P a g e | 21
DIRECTORIES
History Files Directory:
This is the path where the history data file will be written. The path for the history data file can also be modified
through the Recording History File setting. (~\My Documents\HeavyWeather\History by default)
Template Files Directory:
Represents the path where template files are stored. The default is ~\My Documents\HeavyWeather\Templates.
Graph Files Directory:
This is the path where the graph files are stored. (~\My Documents\HeavyWeather\Graphs by default)
Note: It is recommended that the directories be kept on the C:\ drive.
SETTING ALARMS
Your weather station offers the ability to set alarm values for many of the monitored properties. Heavy Weather
Pro allows you to configure these alarms right from your computer. These alarm settings are then also transferred
to the weather station.
To set an alarm, locate the icon that looks like an alarm clock next to the value you wish to set an
alarm for.
Note that there is both a high and low alarm value for most of the properties, and be sure to choose
the one correct one (or both) for your needs.
Note: Wind Direction and Wind Gust provide a single alarm value.
Double click the alarm clock icon and the alarm configure window for that property will appear.
Move the slider control up to increase the alarm trigger value, and down to decrease the trigger
value. Click the “Active” checkbox to enable the alarm, click the Ok button, and you’re all set!
The alarm icon will appear green to indicate that it is active.
When the temperature reaches the trigger value that you have set, the weather station will beep
and the alarm icon will flash red to alert you that an alarm has been activated.
Note: You can silence the beep by pressing the Alarm button on the weather station, but you need to
remove the Active check mark in the Alarm configuration window to de-activate the alarm entirely.
Reminder: Make sure to select the “Active” checkbox before clicking Save.
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für La Crosse WS-2800-IT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von La Crosse WS-2800-IT

La Crosse WS-2800-IT Bedienungsanleitung - Englisch - 31 seiten

La Crosse WS-2800-IT Kurzanleitung - Holländisch - 3 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info